CDT PhD Studentship: Sustainable Fuels and Platform Chemicals from Renewable Sources

About the ProjectAn exciting opportunity is available for a talented and motivated PhD candidate to pursue research on production of hydrogen from wastewater and conversion of hydrogen and CO2 into liquid fuels.Annually the United Kingdom produces a flow of municipal wastewater equivalent to the flow rate of all the water flowing through the river Thames....

Neuroinflammation underlies a broad array of neurological disease, from stroke to cancer. The ability to detect and monitor inflammation in the body is severely limited, hampering efforts to develop and apply new treatments. We are now recruiting a fully-funded PhD studentship that will focus on the development and application of imaging approaches for...

Applications are invited for a PhD Studentship, with an October 2024 start, at the University of Nottingham within the laboratories of the Department of Chemical and Environmental Engineering and School of Chemistry. The project will focus on the synthesis of biodegradable polymers from renewable feedstocks and the development/optimisation of scale-up...

Funding For: UK / Home Students Applications are invited for a PhD Studentship, with an October 2024 start, at the University of Nottingham within the Low Carbon Energy and Resources Technologies Research Group and Advanced Materials Research Group in the Faculty of Engineering. Engineered removal of greenhouse gases from the atmosphere is one way of helping...

We are pleased to offer two NIHR full-time PhD studentships focusing on narratives for people living with dementia and their carers. Students will receive an annual stipend, fees and research expenses. One student will be based at the University of Nottingham and one will be based at the University of West London. We are seeking two enthusiastic and highly...

Applications are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in on-platform manufacturing engineering. The successful candidate will be based at the Rolls-Royce University Technology Centre (UTC) in Manufacturing Technology and On-Wing Technology ) at the University of Nottingham. Having...

Applications are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in manufacturing engineering. The successful candidate will be based at the Rolls-Royce University Technology Centre (UTC) in Manufacturing and On-Wing Technology at The University of Nottingham.We are seeking applicants for an anticipated...

Location: UK OtherSupervisors: Professor Richard Hague, Professor Chris Tuck, Dr. Geoffrey RiversPhD project description: Inkjet printing allows multiple materials to be 3D-printed concurrently, rather than sequentially. Discovering how to leverage this will open new opportunities in manufacturing: structural and medical components with mechanical and...

Applicants are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in on-platform manufacturing engineering. The successful candidate will be based at The Rolls-Royce University Technology Centre (UTC) in Manufacturing and On-Wing Technology at University of Nottingham.This project is in relation to the...

Position Title: Senior Specialist in Chemicals and FuelsLocation: Flexible within Europe / United Kingdom (considering other regions)Work Arrangement: Primarily remote (90% remote)Reporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeAre you driven by the challenge of creating groundbreaking solutions to combat climate change...

Position Title: Senior Specialist in Chemicals and FuelsLocation: Flexible within Europe / United Kingdom (considering other regions)Work Arrangement: Primarily remote (90% remote)Reporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeAre you driven by the challenge of creating groundbreaking solutions to combat climate change...

This exciting opportunity funded by Cancer Research UK is based within the Optics and Photonics Research Group (OPG) at the Faculty of Engineering (FoE), the BioDiscovery Institute (BDI) and the Centre for Cancer Sciences at the University of Nottingham (UoN). These conduct cutting-edge research into the development of technology for biomedical...

Applicants are invited to undertake a 3 year PhD program in partnership with industry to address key challenges in on-platform manufacturing engineering. The successful candidate will be based at The Rolls-Royce University Technology Centre (UTC) in Manufacturing and On-Wing Technology at University of Nottingham.At the Rolls-Royce UTC, we are developing the...

Supervised by: Rasa Remenyte-Prescott (Faculty of Engineering, Resilience Engineering Research Group)Aim: Explore how to integrate data-driven and analytical models for failure prognostics in wind energy applicationsBackgroundHarnessing wind energy through wind turbines has emerged as a vital element in the global shift towards sustainable and renewable...

Position Title: Technical Specialist, Chemicals & FuelsLocation: Flexible, with a preference for Europe / United KingdomWork Arrangement: Primarily remote (90% remote working)Reporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeOverview:Are you driven by the challenge of creating innovative strategies to combat climate change...

Position Title: Technical Specialist, Chemicals & FuelsLocation: Flexible, with a preference for Europe / United KingdomWork Arrangement: Primarily remote (90% remote working)Reporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeOverview:Are you driven by the challenge of creating innovative strategies to combat climate change...

PhD Studentship Opportunity: Advancing Multi-Material 3D Printing Technology The University of Nottingham's Centre for Additive Manufacturing (CfAM) invites applications for a PhD studentship focused on the exciting field of multi-material 3D printing. This research will explore the potential of inkjet printing to create complex structures and electronics...

PhD Studentship Opportunity: Advancing Multi-Material 3D Printing Technology The University of Nottingham's Centre for Additive Manufacturing (CfAM) invites applications for a PhD studentship focused on the exciting field of multi-material 3D printing. This research will explore the potential of inkjet printing to create complex structures and electronics...

Position Title: Senior Specialist in Chemicals and FuelsLocation: Flexible within Europe / United Kingdom (considering other regions)Work Arrangement: Primarily remote, with occasional in-person collaborationReporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeAre you driven by the challenge of crafting groundbreaking solutions...

Position Title: Senior Specialist in Chemicals and FuelsLocation: Flexible within Europe / United Kingdom (considering other regions)Work Arrangement: Primarily remote, with occasional in-person collaborationReporting Structure: Reports to the Deputy Director of ITAEmployment Type: Full-timeAre you driven by the challenge of crafting groundbreaking solutions...