Process Engineer

5 months ago

Washington, United Kingdom Atlas Copco Full time
.fit_to_content{width:%;height:auto}

An exciting opportunity has arisen within the Operations Department for a permanent Process Engineer position, reporting to the Process Engineering Manager. This role also works closely with Production Section Leaders and QA Engineering team.

Responsibilities include:

Health and Safety

Ensure that health, safety and environmental legislative standards are adhered to across all areas of the production environment.

Responsible for ensuring that all safety requirements are clearly stated in the relevant Production SOPs.

Production Process Improvement

Constant review and improvement to ensure effective and efficient process re-engineering, training, piece-part flow etc. Recommend, innovate and implement revised methods and processes to ensure labour costs are in line with the Business objectives.

SOPs

Take ownership and lead for the creation and management of all product and process SOP’s. Ensuring control and adherence within the manufacturing environment (Cross functional sign off). Promote a culture which ensures discipline of standards and expectations are followed and met at all times. Roll out training programmes for all new processes introduced.

Ensure all manufacturing activities to be covered by an SOP and objective assessment located on SharePoint.

CCA Participation

Active role in the completion of CCA’s ensuring the Quality Engineering team are supported to close out complaints in a timely manner.

Ensure continuous improvement in quantity of process related CCAs from the CCA log.

New Product Introduction

Take a lead role to ensure the team actively progress all NPI’s relative to their responsible product areas. Ensure project plan updates are effectively communicated. Preparation of production area(s) to ensure timely/effective product introductions. Validating requirements for jigs and fixtures as required and ensuring a detailed capital expenditure justification is produced.

Ensuring that full buy off has been conducted with documented evidence of this. (FAT / SAT documents)

Ensure that production metrics are recorded and submitted.

NRFT Investigation

Support quality department in the interrogation of NRFT KPI’s and implement actions to remedy for each of the key production areas. Actions should show a clear reduction in the NRFT figure month on month.

Inter-departmental Interface

To provide the primary process interface between allocated manufacturing departments and Technical and Sales.

Ensure all NPI actions are implemented within agreed timeline from NPI meeting / log.

Ensure all PNR and PCD actions are implemented within agreed timeline.

Process change management

Ensure all changes made to process’s are captured via the management of change system.

Full stakeholder sign off and review is used when conducting any process change.

Any other reasonable task the manager may deem as suitable for the role

PERSON SPECIFICATION

The competencies listed are appropriate to the Production / Process Improvement Engineer and are an illustration of the qualities that the Company requires

Professional Requirements

Degree Educated in a relevant field or relevant experience with equivalent qualifications (HND / HNC)3 - 5 years’ experience in an industrial manufacturing roleProven experience of lean manufacturing, continuous improvement and business improvement tools and techniques.Working knowledge of FMEA, 8D, Ishikawa diagrams, 5-why, and SPC. (Yellow / green belt highly desirable)Hands-on Six Sigma experience and qualification is highly desirable.Experience of working to stringent audited ISO quality standards.Experience of transforming manual processes to automated and from batch to single piece flow.

Personal Competencies

Ability to work on own initiative with a pro-active strategic approach to challengesAttention to detailConfident commercial awareness and clear business acumenAbility to influence individuals and teams to achieve desired goals and objectivesExcellent oral and written communication skillsEffective team playerAbility to motivate and lead a team to achieve set goalsAbility to take a systematic approach to daily operationsHighly motivated and able to build close relationships internally and externally to achieve an end goalCustomer and market orientated

  • Process Engineer

    4 weeks ago

    Washington, United Kingdom CV-Library Full time

    Zenith People are working with our client who are a well established North East based Manufacturer with an exciting future ahead. They are looking to recruit an experienced Process Engineer on a permanent basis. Responsibilities: Working as part of the core project team, you will be responsible for the following:- * Represent engineering department in all...

  • Process Engineer

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job Title: Process EngineerWe are seeking a highly skilled Process Engineer to join our Operations Department. As a key member of our team, you will be responsible for ensuring the efficient and effective operation of our manufacturing processes.Key Responsibilities:Ensure compliance with health, safety, and environmental legislative standards across all...

  • Process Engineer

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job Title: Process EngineerWe are seeking a highly skilled Process Engineer to join our Operations Department. As a key member of our team, you will be responsible for ensuring the efficient and effective operation of our manufacturing processes.Key Responsibilities:Ensure compliance with health, safety, and environmental legislative standards across all...

  • Process Engineer

    2 weeks ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    An exciting opportunity has arisen within the Operations Department for a Process Engineer position, reporting to the Process Engineering Manager. This role works closely with Production Section Leaders and QA Engineering team.Responsibilities include:Health and SafetyEnsure adherence to health, safety, and environmental legislative standards across all...

  • Process Optimization Specialist

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job DescriptionAtlas Copco is seeking a highly skilled Process Engineer to join our Operations Department. As a Process Engineer, you will play a critical role in ensuring the efficient and effective operation of our manufacturing processes.Key ResponsibilitiesHealth and SafetyEnsure compliance with all relevant health, safety, and environmental regulations...

  • Process Optimization Specialist

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job DescriptionAtlas Copco is seeking a highly skilled Process Engineer to join our Operations Department. As a Process Engineer, you will play a critical role in ensuring the efficient and effective operation of our manufacturing processes.Key ResponsibilitiesHealth and SafetyEnsure compliance with all relevant health, safety, and environmental regulations...

  • Process Improvement Specialist

    3 days ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    An exceptional opportunity has become available within the Operations Department at Atlas Copco for a permanent Process Improvement Specialist position, reporting directly to the Process Engineering Manager. This role collaborates closely with Production Section Leaders and the QA Engineering team to drive excellence in operations.Key ResponsibilitiesEnsure...

  • Industrial Process Improvement Manager

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job DescriptionAtlas Copco is seeking a highly skilled and experienced Process Engineer to join our Operations Department. As a Process Engineer, you will play a critical role in ensuring the efficient and effective operation of our manufacturing processes.Key ResponsibilitiesHealth and SafetyEnsure compliance with all relevant health, safety, and...

  • Industrial Process Improvement Manager

    2 months ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job DescriptionAtlas Copco is seeking a highly skilled and experienced Process Engineer to join our Operations Department. As a Process Engineer, you will play a critical role in ensuring the efficient and effective operation of our manufacturing processes.Key ResponsibilitiesHealth and SafetyEnsure compliance with all relevant health, safety, and...

  • Process Improvement Specialist

    2 weeks ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job SummaryWe are seeking a highly skilled Process Improvement Specialist to join our Operations Department. As a key member of our team, you will be responsible for ensuring the effective and efficient operation of our manufacturing processes.Key Responsibilities• Ensure compliance with health, safety, and environmental legislative standards across all...

  • Process Improvement Specialist

    1 week ago

    Washington, Sunderland, United Kingdom Atlas Copco Full time

    Job SummaryWe are seeking an experienced Process Improvement Specialist to join our Operations Department. The successful candidate will be responsible for ensuring the effective and efficient operation of our manufacturing processes.Key Responsibilities• Ensure compliance with health, safety, and environmental legislative standards across all areas of the...

  • Manufacturing Engineer

    1 month ago

    Washington, United Kingdom CV-Library Full time

    Zenith People are working with our client who are a Manufacturer looking to recruit an Equipment Engineer on a permanent basis. The successful candidate will be Electrical Biased and take responsibility for all process and plant equipment while supporting Production, Quality Assurance and Maintenance Departments. Responsibilities: * Support the development...

  • Quality Engineer

    3 weeks ago

    Washington, United Kingdom CV-Library Full time

    Quality Engineer Role Purpose of the Quality Engineer This role will involve supporting all Quality Assurance activities across the site. You will be responsible for the development of parts & processes, creation of QA documentation and maintenance of associated QA systems to satisfy all ANPQP and business requirements. The person that is recruited for...

  • Manufacturing Engineering Professional

    3 days ago

    Washington, Sunderland, United Kingdom ENGINEERINGUK Full time

    Program OverviewThe Manufacturing Engineering Degree Apprenticeship is a 4-year program that combines academic study with hands-on experience in advanced manufacturing processes. As a Manufacturing Engineer Apprentice, you will work closely with experienced professionals to develop and implement innovative manufacturing solutions. You will have the...

  • Manufacturing Engineer

    1 month ago

    Washington, United Kingdom Zenith People Full time

    Zenith People are working with our client who are a Manufacturer looking to recruit an Equipment Engineer on a permanent basis. The successful candidate will be Electrical Biased and take responsibility for all process and plant equipment while supporting Production, Quality Assurance and Maintenance Departments.Responsibilities: * Support the development of...

  • Manufacturing Engineering Degree Apprentice

    1 day ago

    Washington, Sunderland, United Kingdom Getting In Limited Full time

    Keys ResponsibilitiesAcross your apprenticeship, you'll develop practical knowledge in areas such as introducing new products, controlling change, and continuously improving existing manufacturing processes. Alongside this, you'll learn how to manage projects and costs, design and validate manufacturing processes, solve engineering problems, and implement...

  • Electrical Engineering Director

    2 months ago

    Washington, Sunderland, United Kingdom Enspec Power Ltd Full time

    {"Overview": "At Enspec Power Ltd, we are seeking a highly skilled and experienced Electrical Engineering Director to lead our technical team. This pivotal role focuses on driving technical excellence, innovation, and strategic direction in the design and development of our electrical systems and solutions.", "The Role": "As the Electrical Engineering...

  • Electrical Engineering Director

    2 months ago

    Washington, Sunderland, United Kingdom Enspec Power Ltd Full time

    {"Overview": "At Enspec Power Ltd, we are seeking a highly skilled and experienced Electrical Engineering Director to lead our technical team. This pivotal role focuses on driving technical excellence, innovation, and strategic direction in the design and development of our electrical systems and solutions.", "The Role": "As the Electrical Engineering...

  • Technical Support Engineer

    4 weeks ago

    Washington, United Kingdom CV-Library Full time

    Technical Support Engineer * Washington * Permanent * £34,000 per annum A growing manufacturing company based in South Tyneside are looking for a Technical Support Engineer to join their team on a permanent basis. You will be based onsite at the engineering facility in South Tyneside, working closely with the Service Manager & field...

  • Head of Electrical Engineering

    2 months ago

    Washington, Sunderland, United Kingdom Enspec Power Ltd Full time

    Job Title: Head of Electrical EngineeringEnspec Power Ltd is seeking a highly skilled and experienced Head of Electrical Engineering to lead our technical team in the design, development, and implementation of advanced electrical systems.Key Responsibilities:Technical Leadership: Lead the electrical engineering team in the design, development, and...