Manufacturing Engineering SME
3 weeks ago
This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory manufacturing engineers and to provide technical leadership and consultation to resources at both peer and junior levels.
This is an 18m FTC role, based on a hybrid basis (3 days office/2 home). There is an expectation of travel, within Europe and Intercontinentally as required.
Responsibilities
- Execute Rotork Business System Audits in readiness for system implementation, develop GAP analysis detail and deliver & execute a programme to remove gaps prior to system deployment.
- Act as a point of contact for the D365 Implementation Programme and as the conduit between the programme and the Operations Function for the Manufacturing Engineeringfunctional area.
- Lead Global, Site Leadership and SMEs through change management to adopt the core D365 operations solution.
- Coordinate/provide the relevant SME/functional resources as required to support delivery of the D365 /Target Operating Model transformation programme.
- Maintain business process maps for operations.
- Support and Govern Site readiness for sites in transition.
- Prepare the content for any change management workshops, taking users through the key areas of change, drawing out high level discussion on potential changes between as “is” and “to be”.
- Work with the Operations Transition manager to consider if change from the global process can be accepted and if the difference will be managed through configuration or Change Management
- Where additional localisation is required, work with the Operations Team, IT to translate Operations needs into system configuration requirements.
- Where the change from current ways of working needs to be managed, identify, monitor and manage any actions required to prepare for and embed the change.
Essential
- Manufacturing engineering leadership for a business manufacturing configured engineered products.
- Detailed understanding of processes within Manufacturing and between Manufacturing and Engineering.
- Operations process development and change leadership.
- Lean / continuous improvement tools and techniques and demonstrated application in a manufacturing setting
- Experience of engineering packages such as Solid Edge and LabVIEW
- Knowledge of Health, Safety and Environmental legislation and application within manufacturing.
Desirable
- Educated to degree or equivalent level in an engineering discipline.
- Experienced in the introduction of a new ERP system into a manufacturing operation.
- Experience of quality control, statistics and capability study, 6 sigma
- Experience of MRP (Material requirements planning)
Rotork is the market-leading global flow control and instrumentation company, helping our customers manage the flow or liquids, gases and powders across many industries worldwide.
Our purpose is Keeping the World Flowing for Future Generations.
For over sixty years, the world has relied on us to create the things that keep everything moving. From oil and gas to water and shipping, pharmaceuticals, and food- these are the flows on which our modern world depends.
Today we're respected and admired for our people, performance and products. Our success flows from our commitment to engineering excellence, and that is what we will always pursue, safely and sustainably.
Rotork is going through an exciting period of change and growth, building on our existing market leadership. It's a great time to join us and make an impact in shaping the future of our business.
-
Manufacturing Engineering SME
2 days ago
Manchester, United Kingdom Rotork Full timeJob Description The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our...
-
Manufacturing Engineering SME
4 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionEnsure you read the information regarding this opportunity thoroughly before making an application.This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365,...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork plc Full timeThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to...
-
Manufacturing Engineering SME
2 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionJob DescriptionThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional...
-
Manufacturing Engineering SME
2 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionEnsure you read the information regarding this opportunity thoroughly before making an application.This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365,...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork Full timeJob DescriptionThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to...
-
Manufacturing Engineering SME
17 hours ago
Manchester, United Kingdom Rotork Full timeJob DescriptionThe experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below.This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork Full timeJob Description This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to...
-
Manufacturing Engineering SME
1 day ago
Manchester, United Kingdom Rotork Full timeJob Description Job Description This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional...
-
Manufacturing Engineering SME
3 weeks ago
Manchester, United Kingdom Rotork Full timeJob Description This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to...
-
Manufacturing Engineer
7 days ago
Manchester, United Kingdom Rotork Full timeThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Rotork Full timeThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Rotork Full timeThis role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory...
-
Graduate Mechanical Design Engineer
4 weeks ago
Manchester, United Kingdom williams manufacturing Full time£28, to £32, DOE + Holidays + Bank Holidays + Pension + Training & Development + Progression Opportunities Manchester Monday to Friday. Earlier Finish on FridayARE YOU A GRADUATE MECHANICAL DESIGN ENGINEER SEEKING THE OPPORTUNITY TO TAKE A STEP INTO THE WORLD OF MANUFACTURING?This is a fantastic opportunity to take your first step in employment within a...
-
Jr. NPI Quality Engineer
1 month ago
Manchester, United Kingdom Merrimack Manufacturing Full timeMerrimack Manufacturing is seeking an Jr. NPI Quality Engineer to support design transfer activities and quality operations in an innovative, fast-paced, medical device-manufacturing environment.This role includes generation and maintenance of control plans, risk management files, validation protocols, and other QMS documentation to support initial...
-
Graduate Embedded Software Engineer
4 weeks ago
Manchester, United Kingdom Futures Manufacturing Full timeOur client, an electronics design and manufacturing business in Manchester, seek to appoint a Graduate Embedded Software Engineer to their development team. The appointed Graduate Embedded Software Engineer role is a stand alone hands-on design positiondeveloping embedded software within a multidisciplinary design team. You'll be joining an excellent team...
-
Embedded Software Engineer
4 weeks ago
Manchester, United Kingdom Futures Manufacturing Full timeDo you understand how to write good code in embedded C? Do you want to work for a business that promote home working to reduce your commute? do you want great benefits on top of a market leading basic salary? This could be for you! Manufacturing Futures seek to appoint an Embedded Software Engineer working predominantly in embedded C. It's a really exciting...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom GENEWIZ Full timeWhat you’ll be doing: Develops, implements and maintains methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub-assemblies and final assemblies. Interfaces with design engineering in coordinating the release of new products. Estimates manufacturing cost determines time standards and makes recommendations...