Manufacturing Engineer
3 weeks ago
This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory manufacturing engineers and to provide technical leadership and consultation to resources at both peer and junior levels.
This is an 18m FTC role, based on a hybrid basis (3 days office/2 home). There is an expectation of travel, within Europe and Intercontinentally as required.
Execute Rotork Business System Audits in readiness for system implementation, develop GAP analysis detail and deliver & execute a programme to remove gaps prior to system deployment.
Act as a point of contact for the D365 Implementation Programme and as the conduit between the programme and the Operations Function for the Manufacturing Engineeringfunctional area.
Coordinate/provide the relevant SME/functional resources as required to support delivery of the D365 /Target Operating Model transformation programme.
Prepare the content for any change management workshops, taking users through the key areas of change, drawing out high level discussion on potential changes between as “is” and “to be”.
Work with the Operations Transition manager to consider if change from the global process can be accepted and if the difference will be managed through configuration or Change Management
Where additional localisation is required, work with the Operations Team, IT to translate Operations needs into system configuration requirements.
This role is responsible for supporting the Global Operations Transition manager to deliver the Operations Optimisation programme and in particular the migration of 20+ entities from legacy Operations systems to our global ERP system, D365, representing the areas of Manufacturing Engineering management. Providing functional leadership to Factory manufacturing engineers and to provide technical leadership and consultation to resources at both peer and junior levels.
This is an 18m FTC role, based on a hybrid basis (3 days office/2 home). There is an expectation of travel, within Europe and Intercontinentally as required.
Execute Rotork Business System Audits in readiness for system implementation, develop GAP analysis detail and deliver & execute a programme to remove gaps prior to system deployment.
Act as a point of contact for the D365 Implementation Programme and as the conduit between the programme and the Operations Function for the Manufacturing Engineeringfunctional area.
Coordinate/provide the relevant SME/functional resources as required to support delivery of the D365 /Target Operating Model transformation programme.
Prepare the content for any change management workshops, taking users through the key areas of change, drawing out high level discussion on potential changes between as “is” and “to be”.
Work with the Operations Transition manager to consider if change from the global process can be accepted and if the difference will be managed through configuration or Change Management
Where additional localisation is required, work with the Operations Team, IT to translate Operations needs into system configuration requirements.
Manufacturing engineering leadership for a business manufacturing configured engineered products.
Detailed understanding of processes within Manufacturing and between Manufacturing and Engineering.
Lean / continuous improvement tools and techniques and demonstrated application in a manufacturing setting
Experience of engineering packages such as Solid Edge and LabVIEW
Knowledge of Health, Safety and Environmental legislation and application within manufacturing.
Educated to degree or equivalent level in an engineering discipline.
Experienced in the introduction of a new ERP system into a manufacturing operation.
Experience of quality control, statistics and capability study, 6 sigma
Experience of MRP (Material requirements planning)
Rotork is the market-leading global flow control and instrumentation company, helping our customers manage the flow or liquids, gases and powders across many industries worldwide.
From oil and gas to water and shipping, pharmaceuticals, and food- these are the flows on which our modern world depends.
Today we're respected and admired for our people, performance and products. Our success flows from our commitment to engineering excellence, and that is what we will always pursue, safely and sustainably.
Rotork is going through an exciting period of change and growth, building on our existing market leadership.
-
Graduate Engineer
2 weeks ago
Oldham, Greater Manchester, United Kingdom The Engineer Full timeJob Title: Quality Engineer Job Type: Full time, permanent - 37.Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. The Quality Engineer is a key contact for both external customers and suppliers and internal departments and personnel regarding Quality...
-
Quality Engineer
2 weeks ago
Oldham, Greater Manchester, United Kingdom The Engineer Full timeJob Title: Quality Engineer Location : Oldham, Manchester Salary: Competitive Job Type: Full time, permanent - 37.5 hours per week Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. Job Purpose: The Quality Engineer is a key contact for both external...
-
Sales Technical Sales Engineer
2 weeks ago
Stockport, Greater Manchester, United Kingdom The Engineer Full timeBased at Southside, Bredbury but some flexibility to travel/work at other sites Job Type: Full time, Permanent NIBE is a global group that develops and manufactures intelligent, energy-efficient indoor comfort solutions for all types of properties. This allows our clients to reduce their energy consumption and their impact on the environment. NIBE...
-
Jr. NPI Quality Engineer
2 months ago
Manchester, United Kingdom Merrimack Manufacturing Full timeMerrimack Manufacturing is seeking an Jr. NPI Quality Engineer to support design transfer activities and quality operations in an innovative, fast-paced, medical device-manufacturing environment.This role includes generation and maintenance of control plans, risk management files, validation protocols, and other QMS documentation to support initial...
-
Manufacturing Engineer
2 weeks ago
Manchester, United Kingdom GENEWIZ Full timeAzenta Life Science are committed to providing its customer with quality service and products. The Manufacturing Engineer will work to improve the efficiency, quality and productivity of the Manchester site manufacturing cells, Automated Storage installation and Commissioning Delivery of Objectives and projects on time and within budget. Must strive for...
-
Manufacturing Engineer
1 week ago
Manchester, United Kingdom Azenta, Inc. Full timeAzenta Life Science are committed to providing its customer with quality service and products. The Manufacturing Engineer will work to improve the efficiency, quality and productivity of the Manchester site manufacturing cells, Automated Storage installation and Commissioning Delivery of Objectives and projects on time and within budget. Must strive for...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities: Lead NPI engineering activities Cost reduction activities involving tooling and fixture design Drive continuous improvement activities Support PFMEA review and development Suggest...
-
Manufacturing Engineer
7 days ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team.Responsibilities:nLead NPI engineering activitiesnCost reduction activities involving tooling and fixture designnDrive continuous improvement activitiesnSupport PFMEA review and developmentnSuggest...
-
Manufacturing Engineer
1 week ago
Manchester, United Kingdom Kelly Services (UK) Ltd Full timeResponsibilities:Develop and update Manufacturing Instructions.Design, commission, and validate tooling.Assist in industrial validation processes, utilising tools like FMEA's and FAI's.Resolve technical issues encountered during manufacturing.Implement route card changes for rework activities.Manage Configuration Control by incorporating Design Modifications...
-
Manufacturing Engineer
1 month ago
Greater Manchester, United Kingdom Jonathan Lee Recruitment Ltd Full timeJonathan Lee Recruitment has an exciting opportunity for a Manufacturing Engineer to join our client's collaborative and inclusive team in Stockport. This full-time Manufacturing Engineer role offers a salary of £45,000 to £50,000 per annam and many excellent benefits. As a Manufacturing Engineer, you will support manufacturing processes to improve...
-
Manufacturing Engineer
2 weeks ago
Manchester, United Kingdom Akkar Full timeJob Description: We're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities: Lead NPI engineering activities Cost reduction activities involving tooling and fixture design Drive continuous improvement activities Support PFMEA...
-
Manufacturing Engineer
1 day ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities: Lead NPI engineering activitiesCost reduction activities involving tooling and fixture designDrive continuous improvement activitiesSupport PFMEA review and developmentSuggest...
-
Virtual Manufacturing Engineering Engineer
4 days ago
Manchester, United Kingdom Orion Electrotech Full timeMANUFACTURING ENGINEER Are you looking for the opportunity to work for a leading manufacturer of electro-mechanical products in a key Manufacturing Engineering role? The company have a global presence and are currently working on a number of next-generation projects which means your role will be varied and often project-focused. As such, they are looking...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Scroll down for a complete overview of what this job will require Are you the right candidate for this opportunityResponsibilities:Lead NPI engineering activitiesCost reduction activities involving...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Akkar Full timeJob DescriptionWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities:Lead NPI engineering activitiesCost reduction activities involving tooling and fixture designDrive continuous improvement activitiesSupport PFMEA review and...
-
Manufacturing Engineer
7 days ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities:Lead NPI engineering activitiesCost reduction activities involving tooling and fixture designDrive continuous improvement activitiesSupport PFMEA review and developmentSuggest...
-
Manufacturing Engineer
3 weeks ago
Manchester, United Kingdom Akkar Full timeWe're supporting a large automotive supplier, based in Greater Manchester, in their search for a Manufacturing Engineer focused on NPI process to join the team. Responsibilities:Lead NPI engineering activitiesCost reduction activities involving tooling and fixture designDrive continuous improvement activitiesSupport PFMEA review and developmentSuggest cost...
-
Virtual Manufacturing Engineering Engineer
3 weeks ago
Manchester, United Kingdom Jonathan Lee Recruitment Ltd Full timeJonathan Lee Recruitment has an exciting opportunity for a Manufacturing Engineer to join our client's collaborative and inclusive team in Stockport. This full-time Manufacturing Engineer role offers a salary of £45,000 to £50,000 per annam and many excellent benefits. As a Manufacturing Engineer, you will support manufacturing processes to improve...
-
Manufacturing and Engineering Manager
1 month ago
Manchester, United Kingdom Rise Technical Recruitment Limited Full timeEngineering Manager-Manufacturing Mon-Fri-Flex on start/end times Are you an Engineering Manager from a manufacturing background looking for a varied, challenging role on a large (head office) manufacturing site? Reporting into the Operations Manager, the role will involve both line and project management, and oversee areas such as Production...
-
Manufacturing and Engineering Manager
4 days ago
Manchester, United Kingdom Rise Technical Recruitment Limited Full time €50,000 - €65,000Engineering Manager-Manufacturing Mon-Fri-Flex on start/end times Are you an Engineering Manager from a manufacturing background looking for a varied, challenging role on a large (head office) manufacturing site? Reporting into the Operations Manager, the role will involve both line and project management, and oversee areas such as Production...