Welder

4 weeks ago


Stanley, United Kingdom Smart Manufacturing Solutions Full time

**1. Welding Operations**:

- Perform various welding techniques, such as MAG (Metal Active Gas), MAG PULSE, GMAW (Gas Metal Arc Welding), FCAW (Flux Core Arc Welding), MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), to fabricate, assemble, and repair metal components.
- Interpret and follow welding procedures/specifications, and technical drawings to ensure accurate execution of welds.
- Monitor and adjust welding parameters, such as voltage, current, and wire feed speed, to achieve proper penetration and weld quality.

**2. Material Preparation**:

- Prepare materials for welding by cleaning, cutting, bevelling, or shaping them according to job requirements.
- Ensure proper fit-up and alignment of metal components prior to welding, using clamps, jigs, or fixtures as necessary.
- Identify and address any material defects, such as cracks, warping, or contamination, before initiating the welding process.

**3. Quality Control**:

- Inspect welds visually and/or using non-destructive testing methods (e.g., dye penetrant, ultrasonic) to ensure compliance with welding standards and specifications.
- Perform dimensional measurements to verify that welded components meet required tolerances and fitment criteria.
- Identify and rectify any welding defects, such as porosity, undercut, or lack of fusion, to maintain high-quality standards.

**4. Safety and Compliance**:

- Follow all safety guidelines and procedures to maintain a safe working environment.
- Use personal protective equipment (PPE) as required, including welding helmets, gloves, safety glasses, or respirators.

**5. Equipment and Maintenance**:

- Maintain and clean welding equipment, tools, and accessories as part of a robust TPM schedule to ensure optimal performance and longevity.
- Conduct routine inspections of welding equipment to identify any defects or malfunctions and report them for repair or replacement.
- Assist in the setup and calibration of welding machines and equipment as needed.

**6.** **Collaboration and Communication**:

- Collaborate with engineering, fabrication, and assembly teams to ensure accurate interpretation and execution of welding requirements.
- Communicate any welding-related issues, challenges, or suggestions for process improvement to the supervisor or relevant stakeholders.
- Support and mentor junior welders, as needed, to develop their welding skills and knowledge.
- An understating, interest and enthusiasm for manufacturing and engineering in practical terms
- Certification in welding standards/processes (e.g., _AWS D1.1, ISO 9606-1) _is highly desirable.
- Strong welding skills with proficiency in MAG (Metal Active Gas), MAG PULSE, GMAW (Gas Metal Arc Welding), FCAW (Flux Core Arc Welding), MIG (Metal Inert Gas), TIG (Tungsten Inert Gas.
- Knowledge of welding specifications, codes, standards specific and acceptance criteria
- Familiarity with various welding materials, including steel, aluminium, and stainless steel.
- Proficient in reading and interpreting technical drawings, work instructions and weld symbols.
- Experience with welding inspection techniques and non-destructive testing methods.
- Attention to detail and commitment to producing high-quality welds.
- Ability to work independently and in a team environment.
- Willing to work overtime to support business needs when required.
- Knowledge of safety protocols and willingness to adhere to them.

**Salary**: £11.26-£12.82 per hour

**Benefits**:

- Free parking
- On-site parking

Schedule:

- Day shift
- Monday to Friday
- Night shift
- Weekend availability

Application question(s):

- Please advise what specific experience you bring to this role?

**Experience**:

- MIG welding: 2 years (required)
- TIG welding: 2 years (required)

Work authorisation:

- United Kingdom (required)

Work Location: In person

Reference ID: JC1905D


  • Welder

    3 days ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    WLS Recruitment Solutions Ltd is a local recruitment agency with a national reach, based in the North East of England; created and driven by people who understand the importance of delivering the correct recruitment solution to each of our customers. **WLS Recruitment are looking to recruit skilled and experienced Welders to for our Engineering client based...

  • Welder

    3 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder

    1 week ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder/fabricator

    2 days ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    Are you an experienced Welder looking for a new role in 2024??? **WLS are looking to recruit skilled an experienced Welder to produce parts to a high standard for our client based in Stanley, County Durham** Welder's **MUST have experience on the heavier side of Mig welds** and have a good awareness of health and safety. You will need your own transport...

  • Welder

    1 month ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **Job description** WLS Recruitment are recruiting skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. Shifts are Monday to Thursday, 8am until 4.30pm and 1.00pm finish on a Friday £16.28...

  • Welder

    2 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **Job description** WLS Recruitment are recruiting skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. Shifts are Monday to Thursday, 8am until 4.30pm and 1.00pm finish on a Friday £16.28...

  • Mig Welder

    2 months ago


    Stanley, United Kingdom Quay Personnel Full time

    Our client and Engineering and Manufacturing company based in the Stanley area require and number of skilled MIG Welders to join them. The work involves MIG Welding of large fabricated steelwork with some basic fabrication work. You must be a time served MIG Welder ideally with some fabrication experience. The hours are Monday to Thursday 7.30am - 4.30pm...

  • Mig Welder

    1 month ago


    Stanley, United Kingdom Quay Personnel Full time

    Our client and Engineering and Manufacturing company based in the Stanley area require and number of MIG Welders to join them on a long term possibly permanent basis. The work involves MIG Welding of large fabricated steelwork with some basic fabrication work. You must be an experienced MIG Welder ideally with some fabrication experience. The hours are...

  • Welder/fabricator

    5 days ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **Due to growth are looking to recruit skilled and experienced Welders to produce parts to a high standard for our client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. If you have your level 3 qualification/Welding and experience and are looking for a new challenge then...

  • Welder/fabricator

    6 days ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS are looking to recruit skilled an experienced Welder to produce parts to a high standard for our client based in Stanley, County Durham** Welder's must have experience on the heavier side of Mig welds and have a good awareness of health and safety. You will need your own transport due to this being a Nightshift role If you have your level 3...

  • Welder/fabricator

    4 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS are looking to recruit skilled an experienced Welder to produce parts to a high standard for our client based in Stanley, County Durham** Welder's **MUST have experience on the heavier side of Mig welds** and have a good awareness of health and safety. You will need your own transport due to location If you have your level 3 qualification/Welding and...

  • Welder/fabricator

    2 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS are looking to recruit skilled an experienced Welder to produce parts to a high standard for our client based in Stanley, County Durham** Welder's **MUST have experience on the heavier side of Mig welds** and have a good awareness of health and safety. You will need your own transport due to location If you have your level 3 qualification/Welding and...

  • Welder/fabricator

    1 week ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder/fabricator

    4 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder/fabricator

    3 weeks ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder/fabricator

    2 months ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    WLS Recruitment are recruiting skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. Shifts are Monday to Thursday, 8am until 4.30pm and 1.00pm finish on a Friday £15.50 per hour for night...

  • Welder/fabricator

    5 days ago


    Stanley, United Kingdom WLS Recruitment Ltd Full time

    **WLS Recruitment are looking to recruit skilled and experienced Welders to produce parts to a high standard for their client based in Stanley, County Durham** Welder's must be capable of 8mm multi run Mig welds and have a good awareness of health and safety. The role will be temporary for the first 12 weeks with the possibility of a permanent contract for...

  • Welder

    2 months ago


    Stanley, United Kingdom Theo James Recruitment Ltd Full time

    **Job Title**: Welder (MIG) **Location**: Stanley **Type**: Permanent **Shift**: Day shift (Potentially moving to 2 shifts) **Hourly Rate**: £12.50 per hour (Rising to £12.82 after training) **The Company**: - Perform various welding techniques such as MIG pulse process - analyze and comprehend welding procedures/specifications, as well as technical...

  • Mig Welder/fabricator

    2 months ago


    Stanley, United Kingdom Donyal Engineering Ltd. Full time

    We are looking for experienced MIG welder who are capable of fillet and butt welds in the assembly of heavy steelwork items for large structures mainly plate and hollow section for road gantries and substations. **Salary**: £14.50 per hour **Benefits**: - Company pension - On-site parking Schedule: - Overtime Supplemental pay types: - Yearly...

  • Mig Welder

    2 months ago


    Stanley, United Kingdom Quay Personnel Full time

    Our client is an Engineering and Manufacturing company based in the Stanley area and they require 4 experienced MIG Welders. The role requires placing parts in jigs, tacking up and then full weld, remove weld spatter and sharp edges and then quality check to engineering drawing. This is a 2 weeks days and nights rotating shift pattern, 25% shift allowance...