Mechanical Inspector

3 days ago

Brighton, United Kingdom Holt Executive Full time

Holt Executive is proud to partner with a leading company in the aerospace industry based in Brighton, which specialises in high-performance electro-mechanical systems and advanced pneumatic technology. They focus on developing innovative solutions for airborne weapon carriage and release systems within the Mission Avionics and Release Systems sectors.

They are seeking a Mechanical Inspector to be responsible for inspecting precision components from in-house manufacturing and assembly, as well as from subcontractors and suppliers. You will create and run CMM programs using PC-DMIS for both new and legacy components, ensuring accuracy and quality. Additionally, you will develop and update CMM setup and operation instructions for new and modified programs to maintain high standards throughout the processes.

Key Responsibilities for the Mechanical Inspector:

Inspect precision components from internal manufacturing and assembly, as well as from subcontractors and suppliers.
Develop, prove out, and execute CMM programs using PC-DMIS for both new and existing components.
Create and update setup and operation instructions for CMM programs, including adjustments for modified programs.
Conduct first-off inspections.
Perform First Article Inspection (FAI) reporting for single-level parts and complex multi-level assemblies.
Update and maintain all documentation related to inspection procedures.
Communicate with subcontractors and suppliers as needed.
Conduct source inspections, including Vendor Assessment Surveys (VAS) at supplier locations.
Perform patrol inspections of manufacturing areas to ensure ongoing compliance.
Raise Non-Conformance Reports (NCRs) and prepare dimensional reports as required.
Carry out calibration duties, including calibrating mechanical and electrical equipment and managing related quotations and purchase orders, with full training provided for these tasks. 
Key Skills and Experience Required by the Mechanical Inspector:

A recognised Mechanical qualification and previous relevant experience of mechanical inspection.
Experience & understanding of different inspection techniques.
Experience in using precision measuring equipment.
Good working knowledge & experience of ISO 9001:2001 and ideally AS9100 Rev D.
Manufacturing experience (mechanical).
Ability to interpret Engineering Drawings.
Ability to interpret engineering drawing tolerancing including Geometric Tolerancing.
CMM programming & operation preferably with experience using PC-DMIS software. 
Company Benefits:

Half-day finish on a Friday.
25 days holiday per year (plus bank holidays), increasing with long service and with the opportunity to buy/sell up to 5 days.
Private medical insurance with optional family cover.
Pension scheme of up to 7% employer contribution.
Life Assurance 4x salary (flexible up to 10x).
Group income protection.
Flexible opt-in extras such as a health care cash plan, dental insurance, gym membership, critical illness cover and cycle-to-work scheme.
Employee assistance program providing mental health and wellbeing support. 
Security Clearance Requirements:

Due to the nature of our work, many roles require UK nationality and the ability to obtain security clearance. Applicants must also have the right to work in the UK to be eligible for employment.

If your skills and experience match this exciting Mechanical Inspector opportunity, we encourage you to apply now

  • Mechanical Inspector

    3 months ago

    Brighton, United Kingdom CV-Library Full time

    Holt Executive is proud to partner with a leading company in the aerospace industry based in Brighton, which specialises in high-performance electro-mechanical systems and advanced pneumatic technology. They focus on developing innovative solutions for airborne weapon carriage and release systems within the Mission Avionics and Release Systems sectors. ...

  • Mechanical Inspector

    3 days ago

    Brighton, Brighton and Hove, United Kingdom Holt Executive Full time

    About the Role:Holt Executive is partnering with a leading aerospace company based in Brighton to find a Mechanical Inspector. The ideal candidate will be responsible for inspecting precision components from in-house manufacturing and assembly, as well as from subcontractors and suppliers. This role requires experience with CMM programming using PC-DMIS...

  • Mechanical Inspector Position in Brighton

    1 month ago

    Brighton, Brighton and Hove, United Kingdom Holt Recruitment Full time

    Holt Recruitment is currently recruiting for an experienced Mechanical Inspector to work in their Brighton office. The successful candidate will be responsible for inspecting precision components, creating CMM programs, and ensuring quality control standards are met.Responsibilities include:Inspecting components from internal manufacturing and assembly, as...

  • Aerospace Electro-Mechanical Inspector

    1 week ago

    Brighton, Brighton and Hove, United Kingdom Austin Fraser Full time

    Holt Executive is excited to collaborate with a pioneering aerospace company based in Brighton, renowned for its innovative electro-mechanical systems and cutting-edge pneumatic technology.About the RoleWe are seeking a Mechanical Inspector to ensure the quality and accuracy of precision components manufactured by our team and subcontractors. The successful...

  • Senior Mechanical Inspector

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Defence Full time

    Job OverviewOur Defence client is seeking a highly skilled Senior Mechanical Inspector to join their team. As a key member of the inspection department, you will be responsible for ensuring the quality and precision of mechanical components used in mission-critical systems.About the Role:Inspect precision components from various sources to ensure they meet...

  • Senior Quality Control Inspector for Electro-Mechanical Manufacturing

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Holt Executive Full time

    Holt Executive is collaborating with a renowned aerospace company that specializes in innovative electro-mechanical systems and advanced pneumatic technology.About the Position:We seek a highly skilled Mechanical Inspector to conduct precision component inspections, ensuring the highest standards of quality and accuracy.

  • Mechanical Inspector

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Holt Executive Full time

    Holt Executive is proud to partner with a leading company in the aerospace industry, specializing in high-performance electro-mechanical systems and advanced pneumatic technology.Job Summary:We are seeking a Mechanical Inspector to join our team, responsible for inspecting precision components from internal manufacturing and assembly, as well as from...

  • Precision Component Inspector

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Holt Recruitment Full time

    Aerospace Industry OpportunityAt Holt Recruitment, we are proud to partner with a leading company in the aerospace industry based in Brighton. This reputable organization specializes in high-performance electro-mechanical systems and advanced pneumatic technology.Hiring Details:Estimated salary: £45,000 - £55,000 per annum (dependent on experience)About...

  • Quality Assurance Inspector

    1 week ago

    Brighton, Brighton and Hove, United Kingdom Defence Full time

    Job OverviewWe are seeking a highly skilled Quality Assurance Inspector to join our team in the Defence industry. As a Quality Assurance Inspector, you will be responsible for ensuring that all mechanical components meet the highest standards of quality and accuracy.Key Responsibilities:Conduct precision inspections of mechanical components to ensure they...

  • Precision Inspector

    3 days ago

    Brighton, Brighton and Hove, United Kingdom Holt Recruitment Full time

    About Holt RecruitmentWe partner with leading companies in the aerospace industry, specialising in high-performance electro-mechanical systems and advanced pneumatic technology.Job DescriptionThe Mechanical Inspector role involves inspecting precision components from in-house manufacturing and assembly, as well as from subcontractors and suppliers. The...

  • Precision Component Inspector

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Defence Full time

    We are seeking an experienced Mechanical Inspector to join our team at Defence. As a key member of our metrology team, you will be responsible for inspecting precision components and developing CMM programs to meet Defence standards.Inspect precision components from various sources, including in-house manufacture/assembly, sub-contractors, and...

  • Mechanical Inspector

    4 weeks ago

    Brighton, United Kingdom CV-Library Full time

    Key responsibilities: Inspection of precision components from in-house manufacture/assembly, sub-contractors and suppliers. Create prove out & run CMM programs using PC-DMIS for new and legacy components. Create/ amend CMM setup/operation instructions for new & amended programs. First off inspection. First article inspection (FAI) reporting for single...

  • Quality Assurance Inspector

    3 days ago

    Brighton, Brighton and Hove, United Kingdom Austin Fraser Full time

    Job TitleMechanical InspectorAbout the RoleHolt Executive is proud to partner with a leading company in the aerospace industry based in Brighton, specialising in high-performance electro-mechanical systems and advanced pneumatic technology.This exciting opportunity involves inspecting precision components from in-house manufacturing and assembly, as well as...

  • Mechanical Integrity Specialist

    1 week ago

    Brighton, Brighton and Hove, United Kingdom Defence Full time

    **Company Overview**We are the Defence company, a leading provider of precision components and inspection services. Our team is dedicated to delivering high-quality products that meet the strictest standards.**Job Description**We are seeking a skilled Mechanical Inspector to join our team. As a key member of our inspection team, you will be responsible for...

  • Quality Assurance Engineer for High-Performance Systems

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Holt Executive Full time

    Holt Executive is pleased to collaborate with a pioneering company in the aerospace sector, focusing on cutting-edge electro-mechanical systems and sophisticated pneumatic technology.About the Role:We are looking for a skilled Mechanical Inspector to oversee the inspection of precision components sourced from both in-house production and external vendors.

  • Inspection Engineer for Aerospace Systems

    2 weeks ago

    Brighton, Brighton and Hove, United Kingdom Holt Recruitment Full time

    Aerospace Systems Inspection OpportunityWe are working with a leading company in the aerospace industry based in Brighton, which specializes in high-performance electro-mechanical systems and advanced pneumatic technology. The company is seeking a skilled Mechanical Inspector to inspect precision components and ensure quality standards are met.Key...

  • Mechanical Inspector

    5 days ago

    brighton, United Kingdom Defence Full time

    Job Description Key responsibilities: Inspection of precision components from in-house manufacture/assembly, sub-contractors and suppliers. Create prove out & run CMM programs using PC-DMIS for new and legacy components. Create/ amend CMM setup/operation instructions for new & amended programs. First off inspection. First article inspection (FAI)...

  • Mechanical Inspector

    2 weeks ago

    Brighton, United Kingdom Defence Full time

    Job Description Key responsibilities: Inspection of precision components from in-house manufacture/assembly, sub-contractors and suppliers. Create prove out & run CMM programs using PC-DMIS for new and legacy components. Create/ amend CMM setup/operation instructions for new & amended programs. First off inspection. First article inspection (FAI)...

  • Mechanical Inspector

    2 weeks ago

    brighton, United Kingdom Defence Full time

    Key responsibilities: Inspection of precision components from in-house manufacture/assembly, sub-contractors and suppliers. Create prove out & run CMM programs using PC-DMIS for new and legacy components. Create/ amend CMM setup/operation instructions for new & amended programs. First off inspection. First article inspection (FAI) reporting for single...

  • Mechanical Inspector

    4 weeks ago

    Brighton, United Kingdom Defence Full time

    Key responsibilities: Inspection of precision components from in-house manufacture/assembly, sub-contractors and suppliers. Create prove out & run CMM programs using PC-DMIS for new and legacy components. Create/ amend CMM setup/operation instructions for new & amended programs. First off inspection. First article inspection (FAI) reporting for single...