HVAC Technical Engineering Lead

1 week ago

Shurton, United Kingdom NES Fircroft Full time

HVAC Technical Engineering Lead – Bulk Supplier & Fabrication

Accountabilities:
 
Complete technical management of procurement and manufacturing contract activities through the 3 key stages:
Start of Manufacturing (SOM) – ‘M’ reference activities
Factory Acceptance Test (FAT) – ‘F’ reference activities
Shipment to Site – ‘S’ reference activities
Compliance with the ‘Manufacturing Hub’ manual activities
Provide technical support to Project Manager during contract ITT stage including quants and design basis
Compilation and management of distribution matrix in conjunction with the Project Manager
Compilation and management of the surveillance plan in accordance with Quality Requirement grades
Engagement (via the Responsible Designer (RD)) of Direction Industrielle (DI) for manufacturing surveillance execution
Engagement with the Third Party manufacturing surveillance specialist (where activities not undertaken by DI)
Management of Technical Issues during fabrication such as TQ’s, NCR’s and design changes
On behalf the Engineering Manager, lead the end of manufacturing HO3 design gate review to ensure smooth release of materials to site and design responsibility transfer to Joint Design Office
Liaise with Interface and Integration team and construction to establish any specific material run off requirements to meet site installation sequence and ensure that these are instructed via the PMAny other specific duties that the Engineering Manager discharges to the Technical Lead (CEL) for Bulk Supplier and Fabrication

Key Deliverables
Progress and performance reporting to the Engineering Manager
Approved End of Manufacturing Design at HO3 to enable release to site for installation
The Technical Leads (CELs), ensure the technical coordination of NNB equipment contracts on design/qualification dimensions. More specifically, guarantee that the Manufacturing activities respect the design/qualification and technical specifications:
support the PM on all design/qualification-related issues throughout the entire end-to-end process
processes all the open points and modification requests with design impact
proposes to the PM solutions to design-related issues and curative actions if relevant in connection with RD or NNB teams
inform TCO-Technical Lead of significant technical open points, exemptions and NCRs
oversee that Manufacturing is performed in line with design and technical specifications
ensure that all the applicable and applied Manufacturing procedures are in line with the design and technical specifications, in connection with IP, Equipment Engineers and In-shop Inspectors
ensure that NCRs resolution outputs are in line with the design and technical specifications, in connection with QML, Equipment Engineers and In-shop InspectorsA CEL appointment may be singular by contract, or supporting multiple contracts dependent upon the contract size and complexity.

Minimum Qualifications/Experience

Minimum HNC in an engineering discipline. 
Experience of construction of large multi-discipline projects, understanding of engineering design delivery, understanding of cross-discipline relationships, interfaces and coordination. 
Experience of engineering design delivery, requirements, standards, handover and quality needs, including use of 3D modelling environment. 
Nuclear sector experience, ideally in new build environment. 
Proficient in the use of Microsoft Excel & data management. 
A positive ‘can do’ mentality, self-motivated, setting the right behaviours. 
An ability to think laterally and flexibly to deliver solutions, and a ‘process driven’ focus to delivery. 
Strong communication skills with their team and external stakeholders. 
Understanding the needs of nuclear quality and how nuclear quality is assured and controlled.

With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

  • HVAC Technical Engineering Lead

    1 week ago

    Shurton, United Kingdom NES Fircroft Full time

    HVAC Technical Engineering Lead – Bulk Supplier & Fabrication Accountabilities: Complete technical management of procurement and manufacturing contract activities through the 3 key stages:Start of Manufacturing (SOM) – ‘M’ reference activitiesFactory Acceptance Test (FAT) – ‘F’ reference activitiesShipment to Site – ‘S’ reference...

  • Mechanical Engineer

    1 month ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have previous experience in HVAC design, Installation, and or commissioning? Can you apply and demonstrate efficient standards in a HVAC discipline? Would you be interested in joining a leading engineering consultancy driven by an ambitious team of nuclear specialists who are at the forefront of sustainability and innovation? If the answer is yes,...

  • Mechanical Engineer

    4 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have previous experience in HVAC design, Installation, and or commissioning?Can you apply and demonstrate efficient standards in a HVAC discipline?Would you be interested in joining a leading engineering consultancy driven by an ambitious team of nuclear specialists who are at the forefront of sustainability and innovation?If the answer is yes, then...

  • Diesel Technical Lead

    3 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have demonstrable experience of technical equipment such as instrumentation, filters, piping, rotating equipment (Pump, compressors), heat-exchangers, pressure equipment such as valves and tanks? Do you have previous experience of operating diesel generators? Would you be interested in joining a leading engineering firm invested in driving the...

  • Diesel Technical Lead

    2 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have demonstrable experience of technical equipment such as instrumentation, filters, piping, rotating equipment (Pump, compressors), heat-exchangers, pressure equipment such as valves and tanks? Do you have demonstrable experience in operating diesel generators? Would you be interested in joining a leading engineering firm invested in driving the...

  • Diesel Technical Lead

    2 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have demonstrable experience of technical equipment such as instrumentation, filters, piping, rotating equipment (Pump, compressors), heat-exchangers, pressure equipment such as valves and tanks?Do you have demonstrable experience in operating diesel generators?Would you be interested in joining a leading engineering firm invested in driving the...

  • Diesel Technical Lead

    1 week ago

    Shurton, United Kingdom Millbank Holdings Full time

    Do you have demonstrable experience of technical equipment such as instrumentation, filters, piping, rotating equipment (Pump, compressors), heat-exchangers, pressure equipment such as valves and tanks?Do you have demonstrable experience in operating diesel generators?Would you be interested in joining a leading engineering firm invested in driving the...

  • Mechanical Engineer

    2 months ago

    Shurton, United Kingdom NRL Recruitment Full time

    Summary NRL are currently looking to recruit Mechanical Engineers at all levels to work for a client of ours on a major nuclear project in Somerset on a permanent basis. Responsibilities Producing detailed design drawings, calculations, design control plans, validation & verification plans, designers risk assessments, quality plans Production of or...

  • Mechanical Engineer

    2 months ago

    Shurton, United Kingdom NRL Recruitment Full time

    SummaryNRL are currently looking to recruit Mechanical Engineers at all levels to work for a client of ours on a major nuclear project in Somerset on a permanent basis.ResponsibilitiesProducing detailed design drawings, calculations, design control plans, validation & verification plans, designers risk assessments, quality plansProduction of or contribution...

  • Mechanical Engineer

    4 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Are you a Mechanical Design Engineer with proven experience in nuclear/defence or a highly regulated industry?Are you experienced in the design and substantiation of mechanical plant and equipment?Do you have previous knowledge of technical supervision of construction/deconstruction activities to ensure compliance with design intent?If the answer is yes, we...

  • Mechanical Engineer

    2 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Are you a Mechanical Design Engineer with proven experience in nuclear/defence or a highly regulated industry?Are you experienced in the design and substantiation of mechanical plant and equipment?Do you have previous knowledge of technical supervision of construction/deconstruction activities to ensure compliance with design intent?If the answer is yes, we...

  • Mechanical Engineer

    1 month ago

    Shurton, United Kingdom Millbank Holdings Full time

    Are you a Mechanical Design Engineer with proven experience in nuclear/defence or a highly regulated industry? Are you experienced in the design and substantiation of mechanical plant and equipment? Do you have previous knowledge of technical supervision of construction/deconstruction activities to ensure compliance with design intent? If the answer...

  • Construction Engineer

    1 month ago

    Shurton, United Kingdom Wolviston Management Services Full time

    Hiring a Construction Engineer to work for our client in Bridgewater. UK wide applications welcome, with accommodation, travel and disturbance allowance paid, to work 5 days (37 hours) per week on site.    You must have a relevant degree in construction or HVAC engineering, or HNC with extensive experience/or career significant site management role...

  • Construction Engineer

    3 weeks ago

    Shurton, United Kingdom Wolviston Management Services Full time

    Hiring a Construction Engineer to work for our client in Bridgewater. UK wide applications welcome, with accommodation, travel and disturbance allowance paid, to work 5 days (37 hours) per week on site.    You must have a relevant degree in construction or HVAC engineering, or HNC with extensive experience/or career significant site management role...

  • Construction Engineer

    2 months ago

    Shurton, United Kingdom Wolviston Management Services Full time

    Hiring a Construction Engineer to work for our client in Bridgewater. UK wide applications welcome, with accommodation, travel and disturbance allowance paid, to work 5 days (37 hours) per week on site.  You must have a relevant degree in construction or HVAC engineering, or HNC with extensive experience/or career significant site management role...

  • Construction Engineer

    2 weeks ago

    Shurton, United Kingdom Wolviston Management Services Full time

    Hiring a Construction Engineer to work for our client in Bridgewater. UK wide applications welcome, with accommodation, travel and disturbance allowance paid, to work 5 days (37 hours) per week on site.  You must have a relevant degree in construction or HVAC engineering, or HNC with extensive experience/or career significant site management role...

  • Senior Construction Delivery Lead

    4 weeks ago

    Shurton, United Kingdom Millbank Holdings Full time

    Are you an experienced Construction Manager with previous experience on large scale Mechanical, Electrical and HVAC installation experience?Would you like to be involved in one of the largest construction projects in the UK?If the answer is yes, please read on for further details and get in touch now!The OpportunityAn exciting opportunity has become...

  • Mechanical Design Engineer

    4 weeks ago

    Shurton, United Kingdom 1st Step Full time

    Mechanical Design Engineer We are recruiting on behalf of our client Dalkia UK and Dalkia Energy Services Dalkia UK is one of the UK's leading technical and energy services providers, at the forefront of delivering net zero solutions to a wide range of clients in private and public sector across the UK. With a talented workforce of over 4,000 people,...

  • Mechanical Design Engineer

    3 weeks ago

    Shurton, United Kingdom 1st Step Full time

    Mechanical Design Engineer We are recruiting on behalf of our client Dalkia UK and Dalkia Energy Services Dalkia UK is one of the UK's leading technical and energy services providers, at the forefront of delivering net zero solutions to a wide range of clients in private and public sector across the UK. With a talented workforce of over 4,000 people,...

  • Mechanical Design Engineer

    2 weeks ago

    Shurton, United Kingdom 1st Step Full time

    Mechanical Design EngineerWe are recruiting on behalf of our client Dalkia UK and Dalkia Energy ServicesDalkia UK is one of the UK's leading technical and energy services providers, at the forefront of delivering net zero solutions to a wide range of clients in private and public sector across the UK.With a talented workforce of over 4,000 people, Dalkia UK...