Protection Test Engineer

3 weeks ago

Stafford Staffordshire, United Kingdom Rubicon Consulting Full time

Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford. This role is Inside IR35. The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this role. Essential Responsibilities:

  • Perform configuration of protection relays, Validation, factory acceptance test (FAT) of Protection systems.
  • Support site activities when required.
  • Seeks resolutions on hardware, Software, or performance related protection/design issues.
  • Manage Fault reports for resolution via Company’s process. To adhere to all required procedures and processes in force at any time.
  • Provide weekly time sheets and monthly reports including status of all work undertaken by the Engineer.
  • Communicate Project schedule progress, report quality issues and tools/equipment requirements.
  • Maintain strong safety mindset to assure the executed work reflects the technical requirements within client safety standards.
  • Warns the project manager and the technical lead in case of budget deviation forecast / any technical deviation which put the project in risk.
  • Abide by all client and local policies and procedures including but not limited to Integrity, Diversity, Proprietary Information, Conflict of Interest.
  • Apply and adhere the company’s quality, environment health & safety policies to the work at Factory and site.
  • Work in a safe manner and ensure appropriate training is taken to do tasks safely.
  • Report any accidents or injuries while on the job.
  • Oversee cubicle safety & good housekeeping practices of team members.
  • Ensure RAMS produced and approved before performing any works.
Job Requirements:
  • The incumbent must possess strong knowledge of protection functions, Electrical Scheme, and cubicle design.
  • Strong working knowledge of relays configuration and testing
  • Electrical (motors, generators, power grid and generation)
Desired Characteristics:
  • Electrical Engineer with over 5 years’ experience in substations ranging from 11kV to 400kV
  • Ability to travel to customer sites - Must have a valid driver’s license.
  • Knowledge on Power & Protection Systems.
  • Experience with electrical Protection relays (LV, MV & HV), detailed design is essential for the job.
  • Strong technical skills on Programming and testing Protection Relays.
  • Ability to perform Functional testing of Protection panels.
  • Experience in Factory Acceptance Testing of protection schemes.
  • Experience on performing testing including but not limited to checking protection functions via secondary injections, GOOSE testing, signal testing with SCADA on IEC61850.
  • Candidates with proven knowledge of client protection relays and Substation automation solutions are preferred.
  • Ability to organize, prioritize and achieve milestones and deliverables.
  • Excellent verbal and written communication skills with a strong customer focus and ability to cooperate with the different departments.
  • A rigorous team working approach with a high level of self-motivation, flexibility, and self-learning aptitude.
  • Strong interpersonal skills.
  • Strong problem-solving skills.
  • The ability to work independently within a dynamic work environment is essential.
  • Well-developed organizational skills are required.
  • Flexible approach to working hours is essential (extended hours and weekends)

  • Protection Test Engineer

    3 weeks ago

    Stafford, Staffordshire, United Kingdom Rubicon Consulting Full time

    Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford. This role is Inside IR35. The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this role. ...

  • Protection Test Engineer

    4 weeks ago

    Stafford, United Kingdom Rubicon Consulting Full time

    Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford. This role is Inside IR35. The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this...

  • Protection Test Engineer

    3 weeks ago

    Stafford, United Kingdom Rubicon Consulting Full time

    Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford.This role is Inside IR35.The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this...

  • Test Engineer

    3 weeks ago

    Stafford, Staffordshire, United Kingdom Rubicon Consulting Full time

    Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford. This role is Inside IR35. The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this...

  • Test Engineer Renewable Energy

    3 weeks ago

    Stafford, Staffordshire, United Kingdom Rubicon Consulting Full time

    Rubicon Consulting is currently recruiting for a Protection Test Engineer on a 6 Month Contract, based in Stafford. This role is Inside IR35. The Protection Test Engineer is responsible for programming, testing of Protection relays and Cubicles. In-depth hands-on experience & knowledge of Protection and scheme design is an essential element of this role....

  • Control and Protection Engineer

    1 week ago

    Stafford, Staffordshire, United Kingdom HCLTech Full time

    Job Description Job Description Summary The Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle). Job Description As a...

  • Control and Protection Engineer

    2 days ago

    Stafford, Staffordshire, United Kingdom HCLTech Full time

    Job Description Job Description Summary The Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle). Job Description As a...

  • Protection Engineer

    2 weeks ago

    Stafford, Staffordshire, United Kingdom Jefferson Wells Full time

    Protection Engineer (Substations) Salary: £50K Location: UK, Ireland, Scandinavia Ready to electrify the world with advanced grid technologies and drive the energy transition forward as a Protection Engineer? Then look no further! The Company: Through pioneering technology to electrify the globe and decarbonize the energy sector, this company is...

  • Control and Protection Engineer

    4 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryThe Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle).Job DescriptionAs a Lead Engineer, you will...

  • Control and Protection Engineer

    3 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description Summary The Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle). Job Description As a Lead Engineer, you...

  • Control and Protection Engineer

    4 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryThe Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle).Job DescriptionAs a Lead Engineer, you will...

  • Control and Protection Engineer

    2 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryIf you want to know about the requirements for this role, read on for all the relevant information.The Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes...

  • Control and Protection Engineer

    4 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryThe Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle).Job DescriptionAs a Lead Engineer, you will...

  • Control and Protection Engineer

    2 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job DescriptionJob Description SummaryThe Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle).Job DescriptionAs a Lead...

  • Control and Protection Engineer

    4 weeks ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryThe Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes following full SDLC (Software Development Life Cycle).Job DescriptionAs a Lead Engineer, you will...

  • Control and Protection Engineer

    3 days ago

    Stafford, United Kingdom HCLTech Full time

    Job Description SummaryIf you want to know about the requirements for this role, read on for all the relevant information.The Lead Control & Protection Software Engineer will be part of highly motivated dynamic team of engineers working on design, development and maintenance of control and protection system application software for LCC and VSC HVDC schemes...

  • Manufacturing Engineering Test Engineer

    2 days ago

    Stafford, Staffordshire, United Kingdom Security Cleared Jobs Full time

    Manufacturing Test Engineer An exciting opportunity awaits you as a Manufacturing Test Engineer, where you will play a crucial role in supporting current and future equipment introductions for testing HVDC Products. Your responsibilities will involve ensuring the efficient execution of complex electronic assembly testing, diagnostics, and maintenance...

  • Test Engineer

    1 month ago

    Stone, Staffordshire, United Kingdom Vantage Consulting Full time

    Power Systems Test Engineer Stone As an experienced power systems engineer, you'll work in both a conceptual and detailed design engineering environment providing engineering solutions to the end customer. You'll develop and direct the preparation and execution of comprehensive test plans. Manage procedures and schedules for completing systems....

  • Senior Control and Protection Verification

    1 month ago

    Stafford, United Kingdom GE Renewable Energy Full time

    **Job Description Summary**: As a Senior Control and Protection Verification & Validation Product Specialist you will be working across the Engineering Delivery function and the NPI As a Senior Control and Protection Verification & Validation Product Specialist you will be working across the Engineering Delivery function and the NPI function reporting...

  • Substation Protection Design Engineer

    3 weeks ago

    Stafford, Staffordshire, United Kingdom GE Aviation Full time

    Job Description Summary The Substation Protection Design Engineer will lead a geographically diverse team of designers, sub-contractors, engineers and project teams working on protection and control schematics and substation equipment. The role will offer the possibility to have a high-level overview of design and interface with various teams throughout...