PhD Studentship in 3D Printing Next-generation Actuators for Soft Robots and Devices

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, bio-printing for medical applications,...

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, physics, and materials science.PhD project...

ESRC DTP Strategic Joint StudentshipUniversity of Nottingham and University of BirminghamThe Midlands Graduate School is an accredited Economic and Social Research Council (ESRC) Doctoral Training Partnership (DTP). One of 14 such partnerships in the UK, the Midlands Graduate School is a collaboration between the Universities of Warwick, Birmingham,...

Background: The School of Medicine is the largest school in the University, covering a diverse range of medical, surgical, and other healthcare disciplines. Our world-leading research ranges from basic and translational science through to clinical trials, health economics, epidemiology, and health services research. We have a vibrant postgraduate community...

Supervised by Dr Serik Tokbolat and Prof Jo Darkwa Aim: To investigate and perform the life cycle and techno-economic assessment of various thermochemical energy storage technologies in the context of industrial waste heat applicationBackground: Waste heat generated by UK industry and power generation sectors exceeds the UK's total annual electricity demand...

As an experienced Civil Engineer, do you ever find yourself asking "What's next?"Picture this. You've been working in Civil (Infrastructure - highways & drainage) design for a few years now. You're pretty good at it, even if you're being modest with yourself.What you're looking for however is that next real step up.I don't mean just a pay rise, or even just...

The contract is fixed term, initially for 6.5 monthsAbout the RoleAs a Research fellow you will be working mainly on the research in the development of new materials (including graphene and other materials) and digital fabrication (e.g., inkjet printing) for smart wearable electronics textiles, sustainable textiles and fibre-reinforced polymer composites....

IT EngineerNottingham£40,000 to £45,000 + Great Benefits Package Excellent opportunity for an IT Support Engineer with experience of computer networks and systems maintenance to join one of the largest manufacturers in the Midlands, in a stable, varied, and interesting role. This company are market leaders across several fields and with that are...

PARCEL COLLECTION DRIVERS REQUIREDLocation: BeestonContract: TemporaryHours: between Monday to Friday 14:30-18:30Hourly Rate: £13.37 p/hRoyal Mail is one of the UK's best-loved brands. Every day, bringing letters and parcels to people around the country; something that communities across the UK rely on.They are 150,000 strong with 500 years of history and...

The post holder will work as part of the cross-college multidisciplinary 'Developing a Circular Economy for Medical Testing Plastics' project team, as part of the Birmingham Plastics Network. Many of the barriers to implementing sustainable solutions, in plastics and beyond, are economic, social, legal, cultural, and political in nature, and cannot be...

Looking for a new challenge...... are you a qualified registered general nurse who is talented and patient focused?Sciensus are currently looking for a Specialist Registered Nurse in Nottingham. We are looking for a talented, patient focused clinician to join our fantastic team. As a Specialist Registered Nurse, you will deliver gold standard, one to one,...

Digital & Technology Services are seeking to fill an exciting opportunity within our Service Delivery function. Working as a member of the IT Operations Physical Environment Team (PET), you will be providing administrative support for PET and the wider IT Operations Team. Your duties will include administering the university's mobile device fleet,...

Do you have experience of working with young people aged 3 – 11?Are you an enthusiastic and committed Teaching Assistant looking to join a warm and welcoming school?You will have a talent for engaging children and will be required to work flexibly across all age groups and abilities.Your role will support the work of our teachers. The role will vary from...

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, soft robotics, and materials science. ...

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, bio-printing for medical applications,...

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, physics, and materials science. PhD...

Supervisors: Professor Richard Hague1, Professor Chris Tuck1, Dr. Geoffrey Rivers1 (1Faculty of Engineering) PhD project description: Inkjet printing allows multiple materials to be 3D-printed simultaneously, rather than sequentially, allowing for highly complex structures and devices. Discovering the interactions of these materials and how to...

Applications are invited for a PhD project within the Faculty of Engineering, in the Centre for Additive Manufacturing research group (CfAM, ) at the University of Nottingham. The student will work in world-class laboratory facilities in the CfAM engaging with interdisciplinary team with expertise in 3D printing, physics, and materials science. PhD...

Applications are invited for a fully funded PhD studentship (3 years) within the Faculty of Engineering at the University of Nottingham. The student will work with an interdisciplinary supervisory team with expertise in 3D printing, functional low dimensional materials and sensing. We seek to use 3D printing to create novel multimaterial functional...

Subject area: Drug Discovery, Laboratory Automation, Machine Learning Overview: This 36-month funded PhD studentship will contribute to cutting-edge advancements in automated drug discovery through the integration of high data-density reaction/bioanalysis techniques, laboratory automation & robotics and machine learning modelling. This exciting...

This 36-month funded PhD studentship will contribute to cutting-edge advancements in automated drug discovery through the integration of high data-density reaction/bioanalysis techniques, laboratory automation & robotics and machine learning modelling. This exciting project involves the application of innovative methods such as high-throughput...

Location: UK Other This exciting opportunity is based within the Advanced Materials Research Group in the Faculty of Engineering which conducts cutting edge research into the development of novel bio-instructive materials for healthcare applications. The student will work in world-class facilities and engage with interdisciplinary team with expertise...

The growing field of soft robotics has opened up new possibilities for robotic systems to operate in uncertain and dynamic environments, such as narrow spaces and interactions with unfamiliar objects. The Rolls-Royce University Technology Centre on Manufacturing and On-Wing at the University of Nottingham is a leading research institution specialising...

Applications are invited for an industrial led PhD studentship aimed at developing new, sustainable, advanced concrete materials with carbon negative footprints. To achieve this breakthrough we will use a multi-discipline approach incorporating organic and polymer chemistry, materials science and leading-edge data analysis, including machine learning/AI...

This exciting opportunity is based within the Advanced Materials Research Group in the Faculty of Engineering which conducts cutting edge research into the development of novel bio-instructive materials for healthcare applications. The student will work in world-class facilities and engage with interdisciplinary team with expertise ranging from...

Overview of Added Scientific Added Scientific are a successful, established, technology-agnostic Additive Manufacturing / 3D printing contract research organisation providing consultancy, problem-solving and lab-based technical services to clients. We are particularly specialist in material jetting, binder jetting and photocurable-based Additive...

The Faculty of Science AI Doctoral Training Centre (DTC) invites applications from Home students for fully-funded PhD studentships to carry out multidisciplinary research in the world-transforming field of Artificial Intelligence, commencing 1st October 2024. The studentships will have a duration of 48 months, with an annual stipend at the UKRI rate...

Supervised by Dr Graham Newton (), Dr Lee Johnson, Prof Darren Walsh Fully-funded PhD project (UK students only) Start date: 1 October 2024.  About the Project: We are seeking to recruit a highly motivated and enthusiastic PhD student to work on the synthesis of molecular energy materials. The candidate will work within the Nottingham Applied...

Location: UK Other Closing Date: Wednesday 11 September 2024 Supervised by Dr Graham Newton (graham.newton@nottingham.ac.uk), Dr Lee Johnson, Prof Darren Walsh Fully-funded PhD project (UK students only) Start date: 1 October 2024.  About the Project: We are seeking to recruit a highly motivated and enthusiastic PhD student to work on the synthesis of...

**Engineering**: **Location**: - Jubilee Campus**Salary**: **Closing Date**: - Friday 14 June 2024**Reference**: - ENG167124The growing field of soft robotics has opened up new possibilities for robotic systems to operate in uncertain and dynamic environments, such as narrow spaces and interactions with unfamiliar objects. The Rolls-Royce University...

PhD opportunity: Design and fabrication of multi-metal components for nuclear fusion applications Supervisory team:  Dr Marco Simonelli Dr Ian Maskery Project description The vision for next-generation Additive Manufacturing (AM) is to control the composition of every deposited volume to make functional materials (FMs) directly from...

Project description Construction of large and deep shafts in urban areas is necessary for various construction activities, such as tunnel construction where shafts serve as integral components of the tunnel construction and often operational phases. As tunnels are constructed ever deeper due to the congestion of underground space, so must the shafts...

Midlands Graduate School Doctoral Training Partnership ESRC DTP Strategic Joint Studentship University of Nottingham and University of Birmingham The Midlands Graduate School is an accredited Economic and Social Research Council (ESRC) Doctoral Training Partnership (DTP). One of 14 such partnerships in the UK, the Midlands Graduate School is a...