Senior Mechanical Engineer

3 weeks ago


Rickmansworth, United Kingdom Dover Precision Components Full time

This opportunity is to join a specialist team responsible for the development of new designs of fluid film bearings and auxiliary components for wind turbine applications. You will be required to contribute to multiple areas of product development, using advanced mathematical modelling of mechanical engineering concepts, bearing design development for the ease of manufacture and reduced cost, test rig development, verification and validation of design via testing and product certification.


Problems faced will tend to be difficult and often complex; projects will be managed with limited oversight from the Technical Manager. They will assist / instruct Design Engineers and check drawings for accuracy of design intent and information. The Senior Project Engineer will also be responsible for guiding and mentoring junior members of the engineering team, leading design reviews, preparing DFMEAs, writing engineering standards and developing new design processes & tools. Wind turbine engineering experience while desired is not mandatory. A strong foundation in mechanical engineering concepts and an ability to approach problems using first principles and transfer knowledge from different applications into wind bearings is most important.


What You'll Bring

  • Bachelor’s or Master’s Degree in Mechanical Engineering. Chartered Engineer (CEng) preferred
  • Experience gained in an engineered product development environment, specialised within industrial mechanical machinery manufacturing, ideally involving rotating components, fluid film bearings and seals with high dimensional tolerances
  • A background with experience in tribology
  • Strong understanding and application of engineering principles and design practices
  • Strong understanding of product failure modes and excellent, proven problem-solving skills
  • Mathematical Skills - Ability to parametrically model complex, non-linear mechanical engineering concepts, primarily focussed on structural and fluid dynamics.
  • Computer Skills - Proficiency with MS Office and Windows operating systems is expected. Must have advanced level skill with 3D modelling and using FEA software such as ANSYS, Abaqus or COMSOL. Experience with data analysis & simulation using MATLAB highly desired
  • Reasoning - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
  • Language Skills - Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, specifications and governmental regulations. Ability to read drawings and prepare graphs, tables, and text for final reports and to write procedure manuals
  • Good oral and written communication skills, including the ability to present information and respond to questions from groups of managers, customers, peers

Note: Occasional travelling away will be required to customer and end user locations, conferences and other DPC sites (10-15%)

What You'll Do

  • Prepare concept design proposals for new products; identify requirements, analyze alternative concepts and determine optimum solution to meet project requirements. Report progress on a regular and timely basis, present work to project teams, customers and end users
  • Model complex fluid film bearing behaviour in wind turbines
  • Carry out stress analysis using techniques appropriate for the nature and complexity of the problem. This may include classical methods or Finite Element Analysis, including non-linear contact analysis
  • Prepare technical reports outlining the calculations and assumptions used when evaluating the integrity of new designs and prepare DFMEAs
  • Develop test specifications, monitor product testing, analyze test data and prepare test reports, design and/or re-design test rigs to fit test strategy
  • Build and maintain an understanding of our manufacturing capabilities and standard design practices sufficient to produce the best-cost alternative for the customer and the company
  • Interpret designs, assist / instruct Design Engineers, perform engineering calculations, examine specifications, expedite and process engineering changes, check general arrangement and component drawings for accuracy of dimension and detail
  • Create analytical methods for new products and product enhancements and document standard work processes, engineering standards, procedures and tools
  • Provide guidance and mentor junior engineers, lead design reviews, oversee improvement projects
  • Support manufacturing personnel with evaluations of deviated components, corrective action investigations and other quality related activities
  • Assist supply chain and quality engineers when evaluating new suppliers
  • Support engineering process development and design for manufacturability efforts through specific assignments as directed by the Director, Engineering
  • Independently responsible for meeting deadlines necessary to support the company’s commitments to customers and manufacturing operations

About Us

Waukesha Bearings are a leading designer and manufacturer of hydrodynamic fluid film bearings, active magnetic bearing systems and seals for high-performing turbomachinery and rotating equipment in oil & gas, power generation, marine and industrial markets.

Waukesha Bearings operates from facilities in the United States, United Kingdom, Mexico, Russia, and China and is part of Dover Precision Components, an integrated provider of performance-critical solutions for rotating and reciprocating machinery.

More About The Company

Dover Corporation is a diversified global manufacturer with annual revenue of over $8 billion. Delivering innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services, our team of 25,000 employees are dedicated to redefining what is possible to better serve our customers. Dover Corporation is headquartered in Downers Grove, Illinois. www.dovercorporation.com



  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    Job OverviewWe are seeking a highly skilled Senior Mechanical Engineer to join our team at Dover Precision Components. This role is focused on the design and development of advanced fluid film bearings for wind turbine applications.The successful candidate will have a strong background in mechanical engineering, with experience in tribology and fluid...

  • Senior Engineer

    4 months ago


    Rickmansworth, United Kingdom MWH Treatment Full time

    As MWH Treatment’s service to its client, Thames Water, continues to flourish into AMP8, we are looking to strengthen our Engineering team with a Senior Mechanical Engineer. Based in the Thames Water region (Maple Lodge office), you will report directly to the Regional Discipline Lead (Mechanical).  Our challenging programme of work, across a variety of...


  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    Job TitleSenior Mechanical EngineerLocationUnited States, United Kingdom, Mexico, Russia, or ChinaAbout the JobThis is a senior-level position requiring extensive experience in mechanical design and development, particularly in the energy industry.Key ResponsibilitiesLead design teams to develop and implement new products and technologies.Collaborate with...


  • Rickmansworth, United Kingdom Dover Corporation Full time

    The Senior Mechanical Engineer – Bearings (Sr Applications Engineer) will be responsible for developing new fluid film bearings and auxiliary components for wind turbines. As a member of a small but growing team, they will be required to contribute to multiple areas of product development – Advanced mathematical modelling of mechanical engineering...

  • Design Engineer

    4 months ago


    Rickmansworth, United Kingdom MWH Treatment Full time

    As MWH Treatment’s service to its client, Thames Water, continues to flourish into AMP8, we are looking to strengthen our Engineering team with a Mechanical Engineer. Based in the Thames Water region (Maple Lodge office), you will report directly to the Regional Discipline Lead (Mechanical).  Our challenging programme of work, across a variety of water...


  • Rickmansworth, United Kingdom Dover Precision Components Full time

    Job Description This opportunity is to join a specialist team responsible for the development of new designs of fluid film bearings and auxiliary components for wind turbine applications. You will be required to contribute to multiple areas of product development, using advanced mathematical modelling of mechanical engineering concepts, bearing design...


  • Rickmansworth, United Kingdom Dover Precision Components Full time

    This opportunity is to join a specialist team responsible for the development of new designs of fluid film bearings and auxiliary components for wind turbine applications. You will be required to contribute to multiple areas of product development, using advanced mathematical modelling of mechanical engineering concepts, bearing design development for the...

  • Technical Lead

    4 weeks ago


    Rickmansworth, Hertfordshire, United Kingdom MWH Treatment Full time

    Job Description: We are seeking a talented Senior Mechanical Engineer to join our team at MWH Treatment, a leading provider of water and wastewater solutions.About the Role: As a Senior Mechanical Engineer, you will be responsible for leading the design and development of our water and wastewater systems, working closely with our clients and stakeholders to...


  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    **Job Title:** Mechanical Engineering Design Specialist**Estimated Salary:** $100,000 - $140,000 per yearWe are seeking a skilled Mechanical Engineering Design Specialist to contribute to the development of new designs for fluid film bearings and auxiliary components in wind turbine applications.As a key member of our team, you will work on multiple areas of...

  • Design Engineer

    3 days ago


    Rickmansworth, Hertfordshire, United Kingdom Dover Corporation Full time

    We are seeking a highly skilled Design Engineer - Mechanical Specialist to join our team at Dover Precision Components.The estimated salary for this position is $120,000-$180,000 per year, depending on experience and qualifications.This role will involve developing new fluid film bearings and auxiliary components for wind turbines. You will work closely with...

  • Mechanical Engineer

    2 days ago


    Rickmansworth, Hertfordshire, United Kingdom MWH Treatment Full time

    Job Title: Mechanical Engineer - Project DeliveryAbout the Role:We are looking for a Mechanical Engineer to lead project delivery teams at MWH Treatment. This challenging role involves working with various water and wastewater schemes, offering hybrid working conditions and competitive remuneration packages.Key Responsibilities:Work alongside other...

  • Principal Engineer

    4 months ago


    Rickmansworth, United Kingdom MWH Treatment Full time

    As MWH Treatment’s service to its client, Thames Water, continues to flourish into AMP8, we are looking to strengthen our Engineering team with a Principal Mechanical Engineer. Based in the Thames Water region (Maple Lodge office), you will report directly to the Regional Discipline Lead (Mechanical).  Our challenging programme of work, across a variety...


  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    OverviewWelcome to Dover Precision Components, where we design and manufacture innovative solutions for the global energy industry.Job DescriptionWe are looking for a talented Senior Mechanical Engineer to join our team, working on complex projects that require expertise in fluid film bearings and auxiliary components for wind turbine applications.Your Key...


  • Rickmansworth, United Kingdom MWH Treatment Full time

    As MWH Treatment’s service to its client, Thames Water, continues to flourish into AMP8, we are looking to strengthen our Engineering team with a Senior Process Engineer. Based in the Thames Water region, you will report directly to the Regional Discipline Lead (Process), which will catalyse your development.  Our challenging programme of work, across a...


  • Rickmansworth, Hertfordshire, United Kingdom Andretti Cadillac Full time

    We are looking for a highly skilled Mechanical Design Lead to join our team at Andretti Cadillac. This exciting opportunity offers the chance to lead mechanical design and processes, focusing on car performance and delivery targets.The successful candidate will have extensive experience in mechanical design, with a strong background in suspension design and...

  • Mechanical Engineer

    5 days ago


    Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    Job DescriptionWe are seeking a highly skilled Mechanical Engineer - Fluid Dynamics Expert to join our team at Dover Precision Components. As a key member of our engineering department, you will be responsible for designing and developing advanced fluid film bearings for wind turbine applications.Your expertise in fluid dynamics and tribology will be...


  • Rickmansworth, Hertfordshire, United Kingdom Dover Corporation Full time

    Role SummaryThe Senior Technical Director at Dover Corporation is responsible for leading a team of engineers in the design and development of fluid film bearings for various industrial applications.With a strong background in mechanical engineering and leadership, you will be responsible for developing and implementing technical strategies that drive...


  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    Job OverviewWe are seeking an experienced Advanced Mechanical Engineer to join our team at Dover Precision Components as a Turbomachinery Design Specialist.


  • Rickmansworth, Hertfordshire, United Kingdom Dover Precision Components Full time

    Job SummaryWe are seeking a highly skilled Senior Mechanical Engineer to join our specialist team developing new designs for fluid film bearings and auxiliary components in wind turbine applications.About the RoleThis is an exciting opportunity to contribute to multiple areas of product development, using advanced mathematical modeling and mechanical...


  • Rickmansworth, Hertfordshire, United Kingdom Andretti Cadillac Full time

    Senior Aerodynamic Technician PositionWe are seeking an experienced Senior Aerodynamic Technician to join our team at Andretti Cadillac's new Silverstone Facility. As a key member of the Andretti Cadillac Team, you will be responsible for assisting with the training of more junior group members and working closely with aero development and performance...