CNC Turner/ Setting Operator

4 months ago

Bristol, United Kingdom Aeropeople Limited Full time
Job Title: CNC Turner/ Setting Operator
Salary: £15.00- £18.00 per hour dependent upon experience (+ 25% shift allowance if working double day shifts)
Location: Bristol
An opportunity is now available to join a private, family- owned UK aerospace manufacturing group. Our client is looking to hire a CNC Turner/ Setting Operator to be based at their site in Bristol. This is a permanent position working 37 hours per week with an early finish on Fridays.
Established more than 80 years ago they have since merged with a second company to create a leading supplier of complex, machined components and assemblies for the aerospace industry. They have specialist capabilities including thread rolling, heat treatment and NDT with customers in civil, defence, production and aftermarket sectors.
The CNC Turner will assist in the manufacturing of parts through the production process, ensuring planned times for setting and manufacturing are met or improved; and high quality parts produced within required performance, cost and delivery targets.
Day shifts and double day (day/ afternoon) shifts available- please note that if you opt to work a double day shift you will receive a 25% shift allowance on top of your hourly pay rate. However, this is not mandatory.
Main Responsibilities:
* Setting and Operating CNC Lathe Machines using Fanuc controls.
* Producing high complexity components from a range of materials
* Adhering to quality standards
Benefits:
* Hourly pay rate of £15.00- £18.00 dependent upon experience + 25% shift allowance if working a double day shift
* Overtime (when available) paid at time and a half
* Company Bonus Scheme
* Company Pension Scheme
* 25 days annual leave plus bank holidays
* Employee Referral Programme
* Health Cash Plan and Life Assurance after 1 years’ service
* Cycle to Work Scheme
* Employee Assistance Programme
About You:
* Ability to work independently or as part of a team
* Good attention to detail
* Previous experience as a CNC Lathe Machinist
* Previous manufacturing experience
* Previous Aerospace experience (desirable)
* Good working knowledge of manufacturing techniques and Engineering drawings is essential.
* Excellent problem solving skills
About Aeropeople:
Whether you’re looking for your next job or searching out the next superstar to join your team…
Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses.
During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period.
For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner £18.47 per hour, £36,500 (including shift rate), Bonus, BS10 5NB, 33 days leave, Early shift: 6am to 2pm Monday to Thursday, 6am to 12pm Friday, Late shift: 2pm to 10pm Monday to Thursday, 6am -12.00 Friday. Due to a strong order book and expansion we are looking for CNC Turner, CNC machinist or CNC programmer to set and operate Mazak CNC...

  • CNC Turner

    4 weeks ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner £18.47 per hour, £36,500 (including shift rate), Bonus, BS10 5NB, 33 days leave, Early shift: 6am to 2pm Monday to Thursday, 6am to 12pm Friday, Late shift: 2pm to 10pm Monday to Thursday, 6am -12.00 Friday.Due to a strong order book and expansion we are looking for CNC Turner, CNC machinist or CNC programmer to set and operate Mazak CNC...

  • CNC Turner

    3 months ago

    Bristol, United Kingdom Travail Employment Group Ltd Full time

    £30,610 per annum or £15.91 per hour, plus overtime, Permanent, Keynsham BS31, 33 days holiday, working Monday to Friday 37 hour week, core hours 7.30 - 15.30, early finish Friday, pension, parking. Our client is an established and highly respected manufacturer who operates a friendly team of engineers and has an opportunity to work in a temporary...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner £15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking. Due to retirement this friendly and established sub contract workshop have an opportunity to join their team as a cnc turner or manual turner or programmer reporting to the machining supervisor. The...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner£15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking.Due to retirement this friendly and established sub contract workshop have an opportunity to join their team as a cnc turner or manual turner or programmer reporting to the machining supervisor.The cnc...

  • CNC Turner

    3 months ago

    Bristol, United Kingdom Truly Talented Full time

    I am working with a Precision Engineering company near Bristol who are looking to recruit a CNC Turner who can set/operate/program Fanuc Lathes. - **Must have** experience setting/operating/programming CNC Lathes. - Manual lathe experience would also be advantageous. Pay is starting at £16 an hour during probation, going up after. - Straight days, no shift...

  • CNC Turner

    3 months ago

    Bristol, United Kingdom Truly Talented Full time

    I am working with a Precision Engineering company near Bristol who are looking to recruit a CNC Turner who can set/operate/program Fanuc Lathes. - **Must have** experience setting/operating/programming CNC Lathes. - Manual lathe experience would also be advantageous. Pay is starting at £16 an hour during probation, going up after. - Straight days, no shift...

  • CNC Turner

    3 months ago

    Bristol, United Kingdom Truly Talented Full time

    I am working with a Precision Engineering company near Bristol who are looking to recruit a CNC Turner who can set/operate/program Fanuc Lathes. - **Must have** experience setting/operating/programming CNC Lathes. - Manual lathe experience would also be advantageous. Pay is starting at £16 an hour during probation, going up after. - Straight days, no shift...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time €30,000

    CNC Turner Read all the information about this opportunity carefully, then use the application button below to send your CV and application. £15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking. Due to retirement this friendly and established sub contract workshop...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time €30,000

    CNC Turner Read all the information about this opportunity carefully, then use the application button below to send your CV and application. £15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking. Due to retirement this friendly and established sub contract workshop...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC TurnerRead all the information about this opportunity carefully, then use the application button below to send your CV and application.£15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking.Due to retirement this friendly and established sub contract workshop have...

  • CNC Turner

    2 months ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner£15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking.Due to retirement this friendly and established sub contract workshop have an opportunity to join their team as a cnc turner or manual turner or programmer reporting to the machining supervisor.The cnc...

  • CNC Turner

    3 weeks ago

    Bristol, United Kingdom Travail Employment Group Full time

    CNC Turner£15.00 per hour £30,420 + overtime at 1.5, Bristol, BS16, 33 days hols, 39 hours per week M-F, Flexible start & finish times, Pension, Parking.Due to retirement this friendly and established sub contract workshop have an opportunity to join their team as a cnc turner or manual turner or programmer reporting to the machining supervisor.The cnc...

  • CNC Turner

    3 months ago

    Bristol, United Kingdom Saphia LTD Full time

    **CNC Setter/Operator/Programmer - Permanent Full time! (Turner)** **Key Responsibilities**: - Setting/Operating/Programming abilities as a CNC Turner - Reading and interpreting engineering drawings - Inspecting finished components to ensure they meet the quality standards - Maintaining the machines, including routine lubrication and cleaning - Keeping a...

  • CNC Turner Setter/operator

    3 months ago

    Bristol, United Kingdom Response Personnel Ltd Full time

    The Role: The CNC Turner will assist in the manufacturing of parts through the production process, ensuring planned times for setting and manufacturing are met or improved; and high-quality parts produced within required performance, cost and delivery targets. **Responsibilities**: Setting and Operating CNC Lathe Machines using Fanuc controls. Producing...

  • CNC Setter/operator

    3 months ago

    Bristol, United Kingdom jamesb@projectstart.co.uk Full time

    My client specialises in taking on challenges the other suppliers can’t - working with exotic materials, ultra-tight tolerances, and demanding engineering requirements. They are now looking for an experienced CNC Turner/Operator (Turner) to join there ever-growing team based in Bristol. **Responsibilities**: Involvement and attendance at SQDCP meetings...

  • CNC Machinist/Manual Turner

    3 days ago

    Bristol, Bristol, United Kingdom Workforce Staffing Ltd Full time

    Job Title: CNC Machinist/Manual TurnerJob Type: Permanent, Full-timeLocation: BristolHours: 37 hours per week, flexible basisPay: £28,000 - £30,000 per annum, depending on experienceAbout the Role:We are seeking a skilled CNC Machinist/Manual Turner to join our team at Workforce Staffing Ltd. As a CNC Machinist/Manual Turner, you will be responsible for...

  • CNC Machinist/Manual Turner

    3 days ago

    Bristol, Bristol, United Kingdom Workforce Staffing Ltd Full time

    Job Title: CNC Machinist/Manual TurnerJob Type: Permanent, Full-timeLocation: BristolHours: 37 hours per week, flexible basisPay: £28,000 - £30,000 per annum, depending on experienceAbout the Role:We are seeking a skilled CNC Machinist/Manual Turner to join our team at Workforce Staffing Ltd. As a CNC Machinist/Manual Turner, you will be responsible for...

  • CNC Machinist

    4 months ago

    Bristol, United Kingdom Shorterm Group Full time

    CNC Machinists - Bristol We are looking for skilled CNC machinists experienced in Milling and/or turning for a highly respected aerospace client based in Bristol. They are a sub contract aerospace manufacturer who do a lot of work with AirBus and are looking for skilled machinists due to a growing demand and plenty of new orders. Contract: Permanent...

  • CNC Machinist

    4 weeks ago

    Bristol, United Kingdom Shorterm Group Full time

    CNC Machinists - Bristol We are looking for skilled CNC machinists experienced in Milling and/or turning for a highly respected aerospace client based in Bristol. They are a sub contract aerospace manufacturer who do a lot of work with AirBus and are looking for skilled machinists due to a growing demand and plenty of new orders. Contract: Permanent...