Production Engineer

3 weeks ago

Bishop Auckland, United Kingdom Logan Lewis Full time
Role Overview
To provide production engineering support for all manufacturing processes for new and existing products and commissioned plant and equipment.
Utilising IFS to share, communicate and control documentation and information.
Operate a continual improvement methodology, driven from various data sources including Overall Equipment Effectiveness (OEE), Corrective and Preventative Action (CAPA) and New Product Introduction (NPI).
Duties will encompass working hands on across the machine shop and assembly area as well as within the office environment.
General Duties and Responsibilities
* Ensure production methods used are the most suitable in terms of safety, quality, efficiency, cost and volume.
* Assist operators where applicable to problem solve manufacturing and production issues.
* Using various data sources ensure you strive to continually improve manufacturing and production processes in your area of expertise.
* Ensure New Product Introduction (NPI) and Corrective and Preventative Actions (CAPA’s) are completed in a timely manner.
* Close out the lessons learnt feedback during production introduction and or steady state.
* Review, update and create, where necessary, all production supporting documentation i.e. Standard Operating Procedures (SOPs), Work Instructions (WIs), operator training documentation.
* Design, develop and manufacture tooling, jigs and poke yoke fixtures for all processes to aid efficient production.
* Ensure all routings, product structures, set / run times, and unit lengths etc. are constantly updated where required.
* Create and update control plans (“green” and “pink” sheets) to ensure product conformity throughout the manufacturing process.
* Complete pre high volume production development work of the new products to confirm design and ensure correct tooling is available and recorded.
* Ensure tooling and fixtures are available to allow the production schedule to be fulfilled without delay.
* Engage with 3rd party specialist to provide any available improvement processes and equipment. Liaise with the manufacturing and design departments to simplify manufacturing processes where possible.
Health and Safety
* Take immediate action on health and safety concerns and / or escalate concerns to the relevant department manager.
* Promote a strong, positive health and safety culture, taking a proactive view of health and safety through regular review of housekeeping.
* Ensure equipment is effectively maintained and guarded where required.
Person Specification
* Experience of working in an engineering/manufacturing environment. Ideally in high precision machining and electromagnetic assembly.
* Excellent ‘hands on’ electromechanical engineering skills.
* Formal engineering qualification to support work experience.
* Ability to work under pressure and independently or as part of a team.
* Experience of automation / semi or full implementation.
* CAD experience ideal, 3D preferably Solidworks.
* Knowledge of problem-solving techniques.
* Strong communication skills.
* Fully computer literate i.e. Microsoft Office
Qualifications
* Time served apprentice or equivalent NVQ/BTEC in an engineering discipline.
* HNC in an engineering discipline or 5 years minimum experience in a similar role

  • Production Engineer

    4 weeks ago

    Bishop Auckland, United Kingdom CDM Recruitment Full time

    We are working with our client who are a leading CNC and Manufacturing business seeking a talented and motivated Production / manufacturing Engineer to join their team. The ideal candidate will be responsible for overseeing the manufacturing process, optimizing production efficiency, and implementing continuous improvement initiatives. You will work closely...

  • Production Engineer

    2 months ago

    Bishop Auckland, United Kingdom CDM Recruitment Full time

    We are working with our client who are a leading CNC and Manufacturing business seeking a talented and motivated Production / manufacturing Engineer to join their team. The ideal candidate will be responsible for overseeing the manufacturing process, optimizing production efficiency, and implementing continuous improvement initiatives. You will work closely...

  • Production Engineer

    2 months ago

    Bishop Auckland, United Kingdom CDM Recruitment Full time

    We are working with our client who are a leading CNC and Manufacturing business seeking a talented and motivated Production / manufacturing Engineer to join their team. The ideal candidate will be responsible for overseeing the manufacturing process, optimizing production efficiency, and implementing continuous improvement initiatives. You will work closely...

  • Production Engineer

    4 weeks ago

    Bishop Auckland, United Kingdom CDM Recruitment Full time

    We are working with our client who are a leading CNC and Manufacturing business seeking a talented and motivated Production / manufacturing Engineer to join their team. The ideal candidate will be responsible for overseeing the manufacturing process, optimizing production efficiency, and implementing continuous improvement initiatives. You will work closely...

  • Production Engineer

    1 week ago

    Bishop Auckland, United Kingdom Logan Lewis Full time

    Production Engineering Support Role at XYZ CompanyIn this role, you will be responsible for providing production engineering support for manufacturing processes of new and existing products, as well as plant and equipment. You will utilize IFS to share, communicate, and control documentation and information.Operate a continual improvement methodology, driven...

  • Production Engineer

    4 weeks ago

    Bishop Auckland, United Kingdom Logan Lewis Full time

    Role Overview To provide production engineering support for all manufacturing processes for new and existing products and commissioned plant and equipment. Utilising IFS to share, communicate and control documentation and information. Operate a continual improvement methodology, driven from various data sources including Overall Equipment Effectiveness...

  • Production Engineer

    1 month ago

    Bishop Auckland, United Kingdom MTrec Ltd Full time

    MTrec’s new career opportunity Our client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job you’ll do * As a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring...

  • Production Engineer

    4 weeks ago

    Bishop Auckland, United Kingdom MTrec Ltd Full time

    MTrec’s new career opportunity Our client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job you’ll do * As a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring...

  • Production Engineer

    1 month ago

    Bishop Auckland, United Kingdom MTrec Ltd Full time

    MTrec’s new career opportunityOur client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis.The Job you’ll do * As a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring production...

  • Production Engineer

    3 weeks ago

    Bishop Auckland, United Kingdom MTrec Ltd Full time

    MTrec’s new career opportunityOur client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis.The Job you’ll do * As a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring production...

  • Production Engineer

    4 weeks ago

    Bishop Auckland, United Kingdom MTrec Technical Full time

    MTrecs new career opportunityOur client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job youll doAs a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring production methods...

  • Production Engineer

    1 week ago

    Bishop Auckland, Durham, United Kingdom MTrec Technical Full time

    MTrec's new career opportunityOur client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job you'll doAs a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring production...

  • Production Planner

    2 days ago

    Bishop Auckland, United Kingdom Careersolve Full time

    Careersolve are working with a manufacturing client who are looking for a **Production Planner** to join their team based in Bishop Auckland. My client offers a generous salary depending on experience. Working Hours: **Monday to Thursday 8.00am - 4.30pm & Friday 8.00am - 4.00pm** Other Benefits Include: - **Death in Service**: - **Free Car parking**: -...

  • Production Manager

    4 weeks ago

    Bishop Auckland, United Kingdom Logan Lewis Full time

    Role Overview To manage the machine shop and assembly process to maximise output through the effective and efficient use of labour, processes and systems. This role has a key focus on proactively driving and implementing continuous improvement in a precision engineering manufacturing environment. Create a process driven culture and remove variation in all...

  • Production Manager

    1 week ago

    Bishop Auckland, United Kingdom Logan Lewis Full time

    Machine Shop and Assembly Manager We are looking for a Machine Shop and Assembly Manager to lead the machine shop and assembly process, maximizing output through effective use of labor, processes, and systems. Role Overview: To manage the machine shop and assembly process to maximize output through effective use of labor, processes, and systems. This role...

  • Production Manager

    3 weeks ago

    Bishop Auckland, United Kingdom Logan Lewis Full time

    Role OverviewTo manage the machine shop and assembly process to maximise output through the effective and efficient use of labour, processes and systems. This role has a key focus on proactively driving and implementing continuous improvement in a precision engineering manufacturing environment. Create a process driven culture and remove variation in all...

  • Production Engineer

    1 month ago

    Bishop Auckland, North East, United Kingdom MTrec Technical Full time

    MTrecs new career opportunityReady to make your application Please do read through the description at least once before clicking on Apply.Our client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job youll doAs a Production Engineer, you will provide support for all...

  • Production Engineer

    1 month ago

    Bishop Auckland, County Durham, United Kingdom MTrec Technical Full time

    MTrec’s new career opportunity Our client are specialists in their market sector. They are looking to recruit an experienced Production Engineer on a permanent basis. The Job you’ll do As a Production Engineer, you will provide support for all manufacturing processes for new and existing products and commissioned plant and equipment; ensuring...

  • Digital Marketing Apprenticeship with Izumi Products

    2 months ago

    Bishop Auckland, United Kingdom Izumi Products Full time

    **About Izumi Products**: Izumi Products Ltd was formed in 1995 by three electrical distribution engineers with over 120 years’ experience between them of working in the electricity construction industry in the UK and South Africa. The company is associated with the Izumi Products company of Japan, as well as other manufacturers in Japan, U.S.A and South...

  • Production Engineer

    2 months ago

    Bishop Auckland, County Durham, United Kingdom CDM Recruitment Full time

    We are working with our client who are a leading CNC and Manufacturing business seeking a talented and motivated Production / manufacturing Engineer to join their team. The ideal candidate will be responsible for overseeing the manufacturing process, optimizing production efficiency, and implementing continuous improvement initiatives. You will work closely...