Injection Moulding Setter

2 weeks ago

Doncaster, United Kingdom Polypipe Building Products Full time
Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products.
Role: To set tooling as required to the state moulding parameters and polybutylene guidelines and fault find.
Responsibilities:
* Ensure the production plans are met on time and in full at the required cost and quality levels
* Ensure a programme of continuous improvement in all activities
* Ensure that first and last offs meet both visual and dimensional specifications and are to out guidelines
* Ensure all relevant data is captured and entered onto appropriate systems (e.g. scrap, production outputs, tooling problems, downtime, material reconciliation, quality issues etc)
* Ensure high levels of safety and hygiene for self and others
* Work with training coordinator to ensure knowledge, training and development is passed onto relevant new starts or apprentices
* Ensure all waste products are separated into their designated containers
* Set up reduction (SMED) and 5s programme
Requirements:
* Selection of job / tool / product from planning board taking account of priorities
* Selection of machine for removal of outgoing tool and insertion of new tool
* Last of extruded product checked and tooling / production data entered onto the appropriate system
* Set up moulding machine using setting sheet as a starting guide
* Obtain first off sample for dimensional and physical testing
* Machine put into operation and the QA informed of production so that the red bin can be removed and the operators informed
* Document all relevant data on and fill in the Setters/Slingers check sheet
* Conduct ongoing quality checks for visual, dimensional and stress testing
* Knowledge of Health and Safety and Environmental standards for self and others
Hours of work: This is a full time permanent role working Days, Nights & Afters - 8 hours per shift.
Working Hours and benefits:
* Monday - Friday
6:00am-2:00pm
2:00pm-10:00pm
10:00pm-6:00am
*
Salary of £36,342.40 per annum.
* 25 days holiday entitlement
* Save as you earn Sharesave Scheme
* Cycle to work scheme
* Contributory pension scheme
* Life assurance (linked to pension scheme membership)
* Free flu vouchers
* Various health & wellbeing initiatives including complimentary occupational health on-site physiotherapy and counselling services
* Staff discount on all Genuit Group products
* Free on-site parking

  • Injection Moulding Setter/supervisor

    4 weeks ago

    Doncaster, United Kingdom Taylor Stevenson Ltd Full time

    Taylor Stevenson are working with an injection moulding business that is looking for an experienced Injection Moulding Setter/Supervisor to join their team. **Responsibilities-** - Set up and adjust injection moulding machines and equipment according to established procedures to ensure that production runs smoothly and efficiently. - Troubleshoot and...

  • Injection Moulding Setter

    2 weeks ago

    Doncaster, United Kingdom Polypipe Full time

    **Polypipe Building Products** are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing...

  • Moulding Setter

    1 month ago

    Doncaster, United Kingdom Pioneer Selection Ltd Full time

    Moulding Tool Setter (MUST HAVE PLASTIC BACKGROUND) - Plastic Manufacturing Comapny Salary: £36,000 Location: Doncaster, South Yorkshire Shift Pattern: LEN - Late (2-10 pm), Early (6 am - 2 pm), Night (10 pm - 6 am) Are you a seasoned Moulding Tool Setter seeking an exciting opportunity? Join our thriving team in Doncaster, South Yorkshire, and play a...

  • Moulding Setter

    1 month ago

    Doncaster, United Kingdom Pioneer Selection Ltd Full time

    Moulding Tool Setter (MUST HAVE PLASTIC BACKGROUND) - Plastic Manufacturing ComapnySalary: £36,000Location: Doncaster, South YorkshireShift Pattern: LEN - Late (2-10 pm), Early (6 am - 2 pm), Night (10 pm - 6 am)Are you a seasoned Moulding Tool Setter seeking an exciting opportunity? Join our thriving team in Doncaster, South Yorkshire, and play a pivotal...

  • Moulding Setter

    2 weeks ago

    Doncaster, Doncaster, United Kingdom Pioneer Selection Ltd Full time

    Moulding Tool Setter (MUST HAVE PLASTIC BACKGROUND) - Plastic Manufacturing ComapnySalary: £36,000Location: Doncaster, South YorkshireShift Pattern: LEN - Late (2-10 pm), Early (6 am - 2 pm), Night (10 pm - 6 am)Are you a seasoned Moulding Tool Setter seeking an exciting opportunity? Join our thriving team in Doncaster, South Yorkshire, and play a pivotal...

  • Injection Moulding Setter

    2 weeks ago

    Doncaster, United Kingdom Polypipe Building Products Full time

    Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. Role: To...

  • Setter Support Operative

    2 weeks ago

    Doncaster, United Kingdom Polypipe Full time

    **Polypipe Building Products** are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing...

  • Tool Setter

    2 weeks ago

    Doncaster, Doncaster, United Kingdom Taskmaster Full time £15

    Taskmaster resources Ltd are working with a well-established client in Thorne, DN8 area who are one of the market leading manufacturers within their industry.As a trusted and leading agency we are looking to recruit a tool slinger / setter to join their friendly team on a full time basis; immediate starts are available. There is no weekend work and overtime...

  • Toolsetter

    6 days ago

    Doncaster, United Kingdom UTrust Recruitment Full time

    Tool setter / slinger **FULL TIME**Our client based in Thorne Doncaster are looking for a qualified Setter.Working from their operation in Thorne.This is a full time role and will be guided by the supervisors / management.Job Role :-Working on injection moulding machineryMounting moulds using crane and clampsWatering up of tools, plumbing fixtures for water...

  • Moulding General Operative

    4 weeks ago

    Doncaster, United Kingdom Polypipe Full time

    **Polypipe Building Products** are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing...

  • Moulding General Operative

    4 weeks ago

    Doncaster, United Kingdom Polypipe Full time

    **Polypipe Building Products** are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing...

  • Process Setter Technician

    4 weeks ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Process Setter Technician

    3 weeks ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Process Setter Technician

    1 month ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Process Setter Technician

    1 month ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Process Setter Technician

    3 weeks ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Process Setter Technician

    3 weeks ago

    Doncaster, United Kingdom Venatu Consulting Ltd Full time

    Process Technician - Plastic Moulding EnvironmentDoncaster£33,700 per annumAre you ready to make an impact in the world of plastic moulding? We are seeking a skilled Process Technician to join our clients team and contribute to our innovative and dynamic plastic moulding environment. If you have Polymer Training to level 3 or equivalent, we want to hear...

  • Extrusion Assistant

    2 weeks ago

    Doncaster, Doncaster, United Kingdom Orbia Full time

    Do you wish to play an active part in building healthy, sustainable environments?At Wavin, we have a 'calling'to service. A purpose. To build healthy, sustainable environments.And where is our help most needed? The very places we live in: our cities. Our cities' drinking water is leaking away, greenery has been disappearing, streets are flooding after heavy...

  • Material Handler

    4 weeks ago

    Doncaster, United Kingdom Questech Recruitment Ltd Full time

    **MATERIAL HANDLER** We are recruiting for an experienced Material Handler to work for our client who is located in Edlington, West Yorkshire. **THE DUTIES**: - Packing, quality inspection and testing of moulded components, and production bookings. - Operate Mechanical Handling Equipment for transfer of manufactured stock. **ESSENTIAL EXPERIENCES &...

  • Toolmaker

    4 weeks ago

    Doncaster, United Kingdom Polypipe Building Products Full time

    Job Description Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing...